2000 watts. 6cuft. What 1 sub

[1ndatrunk 10+ year member]

I've got about 2000watts @2ohms and 6cuft to work with in my trunk, what single sub setup would you guys say would get me the loudest? I was thinking maybe a HDC318 or 15, but I'm open for suggestions.

Click to read more...

 

[Buck 5,000+ posts]

fi btl, or a DD

 

[TSGP]

I've got a DP 21 that would work great //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

a 15 in 6 cubes is too big

 

[jbizzle 5,000+ posts]

AQ HDC3

You'll love it.

 

[forceww 10+ year member]

Fi Btl ftw. With a little bigger box and little under power you should be just right //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[1ndatrunk 10+ year member]

What sizes are we talking? I don't have the room to put a 18 in unless its firing up and even then I'd only have 17in before I hit the lid. My trunk is wide but not that tall. Like I said I'd love a HDC3 18 but I don't think I have the height to pull it off. A 21? That would never fit in the right enclosure.

 

[skmfkr 5,000+ posts]

I've got about 2000watts @2ohms and 6cuft to work with in my trunk, what single sub setup would you guys say would get me the loudest? I was thinking maybe a HDC318 or 15, but I'm open for suggestions.

same thing i was thinking, you can have the 18 facing up instead of back

 

[1ndatrunk 10+ year member]

Would the 18 facing up port back or forward be as loud and deep as a 15 facing back port back? How much clearance from the trunk lid would be optimum?

 

[Aroc 10+ year member]

What kind of car is this going into?

Have you considering sealing the trunk and doing port and sub forward?

I cant load the AQ site right now //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif not a 100% on the mounting depth the 18"aq needs.

If you make the box too high and you shoot the port back you might be sealing off the ports too much...

& thats 6 cubes before displacment corret.

I had 5.6-5.8 cubes to work with and my box went to 3.5 cubes net might be too small for a 18 anyways...

 

[1ndatrunk 10+ year member]

I can do about 5.5 with port tuned to 33-35hz or I can try aeros and go up to 7cuft or so. Its a 85 Cadillac Fleetwood square body. Has the same trunk as a box chevy. The hump right behind my seat stops me from sealing anything off, and I'd only go about 12-13" high so I wouldn't block off my ports and my width isn't edge to edge. I tried to take a lot of that into account as to not do exactky what you said.

 

[1ndatrunk 10+ year member]

Anyone else?