2/0 fuse holder

[geat 10+ year member]

anyone know of one? and also anyone know of any 2/0 to 1/0 reducers? my dad has a bunch of 2/0 at his work and im needing some 1/0 any suggestions?

Click to read more...

 

[jeepintn 10+ year member]

u will probably either have to shave the wire down to fit a 1/0, or get a machine shop to make you some

 

[Team Hammer 10+ year member]

Install a distribution block 2/0 in 1/0 out, Then fuse it.

You can go too any Home Depot and get it.

 

[KnOkIn It 420 10+ year member]

u will probably either have to shave the wire down to fit a 1/0, or get a machine shop to make you some

Like me,but I am the machinish:up2somet: But u could make them out of **** u find around the garage,bur u got buy the ring terminals

 

[geat 10+ year member]

Install a distribution block 2/0 in 1/0 out, Then fuse it.
You can go too any Home Depot and get it.

hmm im looking online i cant find anything

EDIT: fount this http://www.vteworld.com/content/electromech/fuse/html/mega/megafuse.php

http://marineengineparts.com/shopsite_sc/store/html/page229.html

EDIT X2: i could actually make me one, use plexiglass, take a piece that is 1/4" and then take another piece that is 1/4", make two holes in it for bolts, then glue it to the bottom piece, then take another piece, and stick it on top of it holding the bolts inside of it, then just put an ANL fuse on it //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif