1st gen single cab s10

[btlking 10+ year member]

im building a box for my friend but his truck is in the shop does anyone know the max dimensions i can use or have a box design for 2 12s for this truck?

Click to read more...

 

[Blove1991 10+ year member]

Hmmm,, not sure on the 1st gen but Im was able to pull out 4.1 cubes without displacements in my 2nd gen S10

 

[btlking 10+ year member]

did you lose any clicks on the seat because he barely fits in the truck as it is?

the max width is like 54 i think

 

[btlking 10+ year member]

any ideas?

 

[ballstothewall 10+ year member]

When I had two ported 12's mine was somewhere around 12x18.5x40 and the final volume ended up somwhere around 4 cubes.

 

[krisfnbz 10+ year member]

Go take measurements of your friends truck even if its in the shop, it takes like 30 seconds!

 

[btlking 10+ year member]

i would but its over 2 hours away

ill just wait until it comes back.

for the people with a s10 or single cab for that matter wheres the best port direction i thought about firing it to the side is that a good idea?

 

[kickerlivinloud 10+ year member]

i would but its over 2 hours awayill just wait until it comes back.

for the people with a s10 or single cab for that matter wheres the best port direction i thought about firing it to the side is that a good idea?

Firing directions depends on the box. If your building a wedge like box to fit to the contour of the seat I'd say fire to the side. If your building it another way fire it into the seat if you have the room.

Jon

 

[btlking 10+ year member]

it will be slant with a double front baffle so they dont hit the seat when playing