1200 RMS 10" That...

[thevic24 5,000+ posts]

the dd 3510 will get as low as any other sub can but do it much louder.

and the 3510 would be all over the type x.

 

[Maddogg7888 10+ year member]

how much is the 3510 from the dealer

 

[thevic24 5,000+ posts]

kinda pricy but well, well worth it. iirc, they are about $350+shipping. i bought one used from someone here for $275 shipped and it was as close to new as it could be. imo they need a couple of weeks to break in(also says this on dd site) and a used one would help with that.

i also have a new dd 2510 that i got from dd for $265 shipped and that would be a great choice to. it should do 1200 clean rms with no problem.

 

[Maddogg7888 10+ year member]

$350 isnt a problem, looks like im gonna go with the 3510, only thing im concerned about is 1.25 cuft too small? I kno on dd's website they suggest a higher tuning like 35-40 hz, is 30 too low?

 

[thevic24 5,000+ posts]

1.25 will be ok and if you can get near 1.35 would be even better. tune it to 35hz, thoes subs have no problem playing up to an octave below tuning thanks to the design of the suspencion. mine have absoultly no problems hitting the "lows" and i tune to between 35 and 38hz. but yes, you can tune to 30 if you wish and it will be just fine.

 

[Maddogg7888 10+ year member]

i think 32 hz would be good, thanks for the help

 

[cj407]

i have mine (which i found out has had a blown vc for the whole time i've owned it...//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif ) in a 1.64 cu. ft. box tuned to 34.24 hz and it gets down....especially for only half the sub.....time to find another and recone them both.

 

[SomeDonnieDude 10+ year member]

Tc-3000