1000w RMS?

[KRYPTO 10+ year member]

well whats better 1000rms at .5THD or 1000rms at .02THD

 

[Boomsday 10+ year member]

well whats better 1000rms at .5THD or 1000rms at .02THD

on a class D amp?? doesnt really matter

10% is inaudible to the human ear

 

[KRYPTO 10+ year member]

With lower THD you can get better power output.

I would have got the Cadence myself. It has lower THD, better S/N, greater freq response, better features, power rated at 13.8v (unsure about Audiopipe)

I'm sure the Audiopipe is a good amp for the price, but you get what you pay for in most cases.

Either way he already has an amp, now just need to set it properly.

 

[SpiderX1016 10+ year member]

How much current goes through the Remote Wire?

 

[KRYPTO 10+ year member]

Why?

I really think you should find a local to help you with all the simple questions you have.

 

[Boomsday 10+ year member]

With lower THD you can get better power output.I would have got the Cadence myself. It has lower THD, better S/N, greater freq response, better features, power rated at 13.8v (unsure about Audiopipe)

I'm sure the Audiopipe is a good amp for the price, but you get what you pay for in most cases.

Either way he already has an amp, now just need to set it properly.

you can but its not enough to make a big difference in power output honestly, so nope u have no arguement

 

[SpiderX1016 10+ year member]

Why?I really think you should find a local to help you with all the simple questions you have.

Why would I ask someone locally when I already finished everything? Don't even respond if your not going to help.

 

[1rockford1 5,000+ posts]

so u have the amp on its way, what u wana know bro? i seen u said u have 4 ga that should work fine. if u want u can order some 1/0 wire from knu and go int to a block then have 4 ga to the amp. u need a 50 hz for your subs . make sure all the setings on your deck is flat and your amp is set the same way . u wana go 3/4 on your deck and u need to go from there.you can ditch the bass knob that comes with it.

 

[corrie32 10+ year member]

lol dirty power...some people will say anything to try and discredit a brand

i agree,

 

[mclerico83 5,000+ posts]

JBL BP1200.1 Power Series Mono Subwoofer Amp - eBay (item 370437300623 end time Sep-28-10 16:19:04 PDT)

much better option imho

http://cgi.ebay.com/JBL-GTO1201-1II-Car-Amplifier-/260669317450?pt=Car_Amplifiers&hash=item3cb11a214a

 

[SpiderX1016 10+ year member]

so u have the amp on its way, what u wana know bro? i seen u said u have 4 ga that should work fine. if u want u can order some 1/0 wire from knu and go int to a block then have 4 ga to the amp. u need a 50 hz for your subs . make sure all the setings on your deck is flat and your amp is set the same way . u wana go 3/4 on your deck and u need to go from there.you can ditch the bass knob that comes with it.

Actually, it's already here and it's installed already.

Either it's the 100F day or I'm going to need to install a fan cause it runs pretty hot.

I think I need to redo the gain. I did the gain to 31.62VAC without the Bass or Gain Knob. When I connected it, it read close to 21VAC.