10" Type R + T10001bd box help

[rdzm50 10+ year member]

Anyone have a single 10" Type R ported ? or have any suggestions.... i was thinking maybe 1.5 cubes with a 6" aeroport (because i have it laying around)... what do you think?

Click to read more...

 

[rdzm50 10+ year member]

also forgot to say this is for daily driving... in a explorer sport

 

[rdzm50 10+ year member]

bump

 

[rdzm50 10+ year member]

ttt

 

[PowerNaudio 10+ year member]

i have a 10" type r on that same amp.

in a 1.5cuft at 32Hz. it hits low as hell. but the mid 80 and up it lacks it well it doesnt lack it i think the amp just pushes it too hard at that freq. and it sounds rught because if i lower the volume the sub will actualy sound nice up there too.

so i have to say too much power because of impedance drop maybe.

but its a nice low end hitter.

 

[9512ds 5,000+ posts]

why would you want the woofer to play that high?

 

[PowerNaudio 10+ year member]

why would you want the woofer to play that high?

humm because 80Hz still subwoofer duty!.

does that make any sence to you?

i have has subs play all the way to 120Hz in perfect harmony with the rest of the system and do it well.

 

[rdzm50 10+ year member]

i have a 10" type r on that same amp. in a 1.5cuft at 32Hz. it hits low as hell. but the mid 80 and up it lacks it well it doesnt lack it i think the amp just pushes it too hard at that freq. and it sounds rught because if i lower the volume the sub will actualy sound nice up there too.

so i have to say too much power because of impedance drop maybe.

but its a nice low end hitter.

wt... what impedence drop.... there is a impedence rise from the box... and you got pics of it?

 

[PowerNaudio 10+ year member]

what exacly are you asking?

impedance drop happen for many reasons on a sub. over heated voice coil from too much power on low frequencies. hum yeah some times from the enclosure. humm i think theres a couple other reasons.

 

[lincolnls 10+ year member]

humm because 80Hz still subwoofer duty!.
does that make any sence to you?

i have has subs play all the way to 120Hz in perfect harmony with the rest of the system and do it well.

most SPL set ups run that high.

in a SQ set up your mids should be picking up around 60hz give or take.

 

[PowerNaudio 10+ year member]

most SPL set ups run that high.
in a SQ set up your mids should be picking up around 60hz give or take.

i would say so if you have a decent set of midbass drivers. but for most cases. the sub will do 80hz and it doesnt have to be an spl set up to hit that high.

personaly i dont see it as that high ither.

 

[rdzm50 10+ year member]

what exacly are you asking?impedance drop happen for many reasons on a sub. over heated voice coil from too much power on low frequencies. hum yeah some times from the enclosure. humm i think theres a couple other reasons.

naw i'm wondering what you are talking about because i have not heard of anything causing a impedence drop... and enclosures cause impedence RISES... not drops so... i don't really know what you are talking about there... but do you have pics of your set up?

 

[PowerNaudio 10+ year member]

here is a couple of pics on that enclosure http://www.cardomain.com/ride/402743/17

 

[rdzm50 10+ year member]

here is a couple of pics on that enclosure http://www.cardomain.com/ride/402743/17

thx... and btw you do some pritty good work

 

[PowerNaudio 10+ year member]

thanks. i try. that enclosure its only temporary and getting replaced with a tc-3000 15" power with dual rockford fosgate T10001BD, now my debate is should i take the back seats out and build an enclosure there or just build the system on a crx.

hummm.