Recent content by Wellyboy

Pink noise is the standard for equing. I'v seen it being used time and time again. Sent from my MHA-L09 using Tapatalk

Is your SSF a switch or a Dial? If your box is vented, u flip switch to on position (it is advised) if you have a dial, set it to 60-80hz If your box is sealed, leave switch in off position. If you have a dial put it as same as above. Sent from my MHA-L09 using Tapatalk

Okay, so you need to wire the voice coils of each sub together or wire all 4 coils if your after a 1 ohm final impedance, in your case where you have 2 speaker outputs on your amp, it's actually 1 divided into 2 to make it simple for people running multiple subs such as now. If your after 2 ohm...

Below or above? I'm not understanding your response there? SSF in my amp is set to not play anything above 28hz as mine is a switch. On position is 28hz fixed, and off position allows you to adjust a seperate knob manually. Sent from my MHA-L09 using Tapatalk

Lowering the SSF in my experience does make the sub play very low, I'm my case after learning about the SSF and what it should be set at was new to me but I sure as hell felt the difference immediately, my ear drums shook like never b4, but I feel like that SSF allows the sub if capable to play...

You Dnt use the audio out, if your using headrest and video out out only the sound needs to come out your main pioneer unit, the audio below are inputs only as I'm running a component to HDMI for my phone to mirror. Sent from my MHA-L09 using Tapatalk

What will your amp be powering? Sent from my MHA-L09 using Tapatalk

Lmfao, far from new, BOY! Not like I care. You guys argue in the wrong place, some 1 asks for help/advice an in the midst of giving an argument pops up as if it's gona help the person asking for help/advice. Sent from my MHA-L09 using Tapatalk

Okay fair enough, but when it comes to internal failure, an this ain't your fault, if fuses don't do what they are intended for it's a factory error, accidents happen no matter what amp it is it's pretty common sense. If they blow like they supposed to, your amp wouldn't have overloaded, protect...

He must have bassboost up. If it heated up fast an smelled strong its most prob that so make sure bassboost is off completely Sent from my MHA-L09 using Tapatalk

I guy named joscoyne made the exact same post in Diy said the exact that thing aswell same amp too...... Abt 48hrs ago, seems like a copy an paste, there was no need for 2 posts the same awnser you getting here you got in your 1st post, what you are trying to achieve? Sent from my MHA-L09 using...

Why are you people at each other's throats. This isn't a personal forum, go you share your feelings behind closed doors it's annoying. Sent from my MHA-L09 using Tapatalk

Find its displacement. Sent from my MHA-L09 using Tapatalk

If you get a 2nd battery u will have to upgrade that alt at some point soon as it will be strained charging 2 batteries, or better yet if your battery is over 100ah then just rewind yout alt to 220 amps an get 1 brand new at 180amps an should in the clear power wise Sent from my MHA-L09 using...

Yeah your ah should be on the battery itself. Clear an visible Sent from my MHA-L09 using Tapatalk