Recent content by sleepybrown

Audio Designs of Atlanta... tell them J sent you.

Thanks again for the information and photos zierbox. After making some measurements, I discovered that I only have 14" of length to work with in the area where I will be mounting the linear actuator. I also needed an actuator that had at least a 10" stroke length so I decided to go with the...

zierbox THAT IS SOME CRAZY WORK MAN! I am trying to an amp exactly like the one that you did in the White Mustang (trying to guess from the lights) Where do you buy you linear actuators from. (trying to find the cheapest spot that I can find) Do you also mind laying out everything that was...

How is your motorized amp rack project coming along. I am trying to do the same with my install. Have you finalized where you will be getting your linear actuator from?

Just heard back from my local Hertz dealer and I was correct. The Space 1.1 tweeter is the same tweeter that is used in the MLK-165 component set.

The Space 1.1 tweeter IMO is way better than the HT25 that comes with the Hertz HSK 165 set. I am trying to find where I read this...but I believe that the Space 1.1 is actually the tweeter that is used in the MLK 165 Component set. (ML28) They move up to he ML280 with the higher level of...

Still playing around with the tweeter placement, but for right now.... I am running the HSK 165 Midbass in the doors with the Space 1 tweeter mounted in the front corners of the windshield.

Did not know that was considered breaking the rules. I was just trying to offer a trusted shop that he could buy from instead of trying to buy from someone on the site.

Let me be the first to welcome you to the forum. About your install, do you plan to install everything yourself? In my mind you can get an awesome sounding system by using either the stock locations or kickpanels. You just need to decide what you over all goal of your system is. As far as...

I know you are in the TX area, but if you want to go through a shop, I would recommend Audio Designs of Atlanta owned by Jeff Smith. http://www.audiodesignsofatlanta.com/ They will ship to you as well....

Your HPF being set at 125Hz up to the passive cross over freq (what ever that is) could be part of the reason why you are not getting any kind of kick from your midbasses. You may want to try to lower that HPF on those midbasses to see if that helps you out.

The answer to why the HV165L look crappy... ..."HV 165L and HV 200 have performance-enhancing properties. Their non-pressed paper cones with cotton fibers improve energy transfer at low and mid frequencies thanks to the special density of the material they consist of. "

You can't go wrong with the High Energy HSK 165 component set. Especially if you are on a budget. If you have more money to spend the Mille line is simply awesome! If you want to stick with the High Energy line, I would recommend using the High energy 165 midbasses with the Space 1 tweeters...

I feel you on the 880PRS. Especially when it is in network mode. Just the added feature of phase shifting alone is worth the switch. Once I started getting further and further into some of the drop down menus like the various networking features, I really started feeling like this headunit...

JL Audio 12W6 Box must have been too big for dudes truck, he never got back to me. 12W6 is back on the market....