So i sketched up a design for 1 sundown sa 10. it will be going on the backseat of my crewcab chevy truck. i just want to see what yall think about it. Opinions/thoughts/improvements/tips greatly appreciated. this is my first box design so I know its not perfect. just lookin for a little advice and feedback. And BTW i am a very skilled artist as you can tell.//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif
View attachment 26548155
I wanted to make a 6" aero port for it but the length (according to the12volt.com's calculator) would have to be like 40 inches so i definately would not fit it. feel free to check all the math an add anything. in my crewcab the sub is definately louder facing the roof. so should i face the port up too or just leave on the side. Thanks in advance. Just want to get it all right before i build it.
incase u cant read numbers in pic here are external measurements:
height=12 inches
width= 24 inches.
depth= 13 1/2 inches
gross internal volume= 1.64 ft^3
net interal volume(after port and sub displacement)= 1.43 ft^3
4" aero 16 1/2" long= 35htz
View attachment 26548155
I wanted to make a 6" aero port for it but the length (according to the12volt.com's calculator) would have to be like 40 inches so i definately would not fit it. feel free to check all the math an add anything. in my crewcab the sub is definately louder facing the roof. so should i face the port up too or just leave on the side. Thanks in advance. Just want to get it all right before i build it.
incase u cant read numbers in pic here are external measurements:
height=12 inches
width= 24 inches.
depth= 13 1/2 inches
gross internal volume= 1.64 ft^3
net interal volume(after port and sub displacement)= 1.43 ft^3
4" aero 16 1/2" long= 35htz