45s in corner, needed?
- Thread starter hockey512546
- Start date
- Replies 22
- Views 1K
-
12Participant count
-
Participant list
hockey512546
basshedz06 10+ year member
CarAudio.com Elite
help with standing waves an i think cut down on heat build up heat+sub=is more money for a recone lol
i would recommend sanding your box insides as smooth as you can get it if your not gonna use 45's but i would be really careful if your not using a table saw.
i would recommend sanding your box insides as smooth as you can get it if your not gonna use 45's but i would be really careful if your not using a table saw.
Lakota 5,000+ posts
Doesn't Know $hit
Don't worry about them. I test this type of stuff and will tell you from experience with a Termlab that it's not necessary for daily driving.
OP
hockey512546 10+ year member
Senior VIP Member
- Thread Starter
- #6
but no one sees the inside
azimuth 5,000+ posts
funded*by*soros
you can see it through the port.
Lakota 5,000+ posts
Doesn't Know $hit
Keep in mind that 45 degree corners can also have a negative impact. They do not always improve box output.
thegreatestpenn 5,000+ posts
lazy genius
they aren't worth the trouble unless you are just that into cutting wood IMO.
bubbagumper6 5,000+ posts
CarAudio.com Veteran
How so?
bubbagumper6 5,000+ posts
CarAudio.com Veteran
The point of 45's is to make the corner width the same as the rest of the port, so it shouldn't be too narrow...
thegreatestpenn 5,000+ posts
lazy genius
if there's not enough port area in the first place then it would be too narrow
Activity
No one is currently typing a reply...
Similar threads
Thanks for the input. Much appreciated. The dsp is an afterthought. I haven't installed anything yet but I put a budget system together. I already...
- Started by Mark Bennett
- Wiring, Electrical & Installation
I have confirmed through JL that these subs have just over 1inch xmech. As long as there is 1inch clearance in front of the front edge of the...
- Started by filly4thirteen
- Subwoofers
Absolutely. I am always learning and think it's probably impossible to stop learning. I appreciate the advice and don't doubt for a second the...
About this thread
- Start date
- Participants
- Who Replied
- Replies
- 22
- Views
- 1,323
- Last reply date
- Last reply from
- Annnarbor84
Latest topics
-
-
-
-
Jeep center console sub install issues.
- Started by vlusardi
- Replies: 1
-
