First system

Asian69

Junior Member
I just got 2 Kenwood KFC-W3011s from crutchfield. 2 12s in a sealed box with a kenwood amp that is 900W RMS @ 2 ohms and 1800 max.

I had the cheapest wiring kit from wal-mart. the power wire is 12 gauge. Just replaced it this weekend. It hit hard and very sloppy for about a day. Then it got cleaner and the volume dropped alot. Way worse than the 12 gauge.

My new power wire is a 4 gauge. I used only the power wire.

I did not install the new grounding or the capacitor it came with. Should I try the new ground? Or just go get an 8 gauge kit

 
I just got 2 Kenwood KFC-W3011s from crutchfield. 2 12s in a sealed box with a kenwood amp that is 900W RMS @ 2 ohms and 1800 max. I had the cheapest wiring kit from wal-mart. the power wire is 12 gauge. Just replaced it this weekend. It hit hard and very sloppy for about a day. Then it got cleaner and the volume dropped alot. Way worse than the 12 gauge.

My new power wire is a 4 gauge. I used only the power wire.

I did not install the new grounding or the capacitor it came with. Should I try the new ground? Or just go get an 8 gauge kit
LMAO //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh://content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh:

stick the cap up yo ass with some KY and the bass will come back.....

lol //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh://content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh:

 
I just got 2 Kenwood KFC-W3011s from crutchfield. 2 12s in a sealed box with a kenwood amp that is 900W RMS @ 2 ohms and 1800 max. I had the cheapest wiring kit from wal-mart. the power wire is 12 gauge. Just replaced it this weekend. It hit hard and very sloppy for about a day. Then it got cleaner and the volume dropped alot. Way worse than the 12 gauge.

My new power wire is a 4 gauge. I used only the power wire.

I did not install the new grounding or the capacitor it came with. Should I try the new ground? Or just go get an 8 gauge kit
First try a new ground, clean it up and make sure it is on the car chassis and not something connected to the chassis. Also, imo i would change your rca's - spend a little more cash on these.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

The Kappa's have a high sensitivity rating of 93 db so the X802-5 would be fine. A good high sensitivity 8" sub in a properly sized box would fit...
2
275
Sweet!! Im happy to hear that it was not a major issue.!! Very nice man. Thanks for letting us know what the culprit was!!
19
681
Well, I've owned probably over 100 different drivers in the last 40 years and almost every single speaker in the NVX line-up over the last 8...
16
758
I'm most likely getting a 2022 Infinity QX60 next week. Like most new cars, it has the "Infotainment" system with the huge screen and all the...
0
345

About this thread

Asian69

Junior Member
Thread starter
Asian69
Joined
Location
Arkansas
Start date
Participants
Who Replied
Replies
8
Views
575
Last reply date
Last reply from
Paddywad
IMG_0503.jpeg

DEW123

    May 7, 2024
  • 0
  • 0
IMG_0489.jpeg

DEW123

    May 7, 2024
  • 0
  • 0

Latest topics

Top