from the web site
Mono, 4 ohms: 1 x 360 Watts
Mono, 2 ohms: 1 x 500 Watts
T.H.D. + Noise:
S/N Ratio: >95dB
Slew Rate: >29V/uS
Damping Factor: >250 @ 4 ohms
Dimensions: 12"L x7.5"W x 2"H
if you really think of it, this would make a good sq sub amp. if not, and if you don't mind running mono, you can use this as a front speaker amp and each speaker will be seeing a little over 250w rms. if you decide to run all 4 speakers to this amp, each speaker will see about 90 w rms each. if all speakers are 2 ohm, then that brings it up to about 125w rms each. so it could be a good sq sub amp or even a good speaker amp. maybe even a good starter amp for your subs and then if you need more sub out put, buy a bigger sub amp and use this for your speakers. the possibilities are endless.