Zane, help?

[alexlo 10+ year member]

I have seen you cobra on your site. The best looking mustang i ever seen.

I have a 2000 mustang. I have seen alot of people put two 10 in fiberglass box in replacement wheel location but your the first I have seen put three in. I planning to buy 2 infinity perfects, I rather have 12 but two people have told me their isn't enought air space. The enclosure for subs have to be 1ft^3 per chamber, will they fit without any adjustments?

Does anyone have pics of custom enclosure for mustang? I would to see.

thanks

Click to read more...

 

[alexlo 10+ year member]

help, anyone?

 

[Daniel 10+ year member]

try sounddomain.com and click on member pages, there are probabaly some stangs with custom boxes

 

[alexlo 10+ year member]

zane help?

 

[zane 10+ year member]

Originally posted by alexlo I have seen you cobra on your site. The best looking mustang i ever seen.

I have a 2000 mustang. I have seen alot of people put two 10 in fiberglass box in replacement wheel location but your the first I have seen put three in. I planning to buy 2 infinity perfects, I rather have 12 but two people have told me their isn't enought air space. The enclosure for subs have to be 1ft^3 per chamber, will they fit without any adjustments?

 

Does anyone have pics of custom enclosure for mustang? I would to see.

 

thanks

Thanks for checking out my site. The Mustang shown there actually belongs to Sabraj Nijjar. I happened to have stumbled across his site http://www.oghabib.com while surfing one night and was so impressed with his talent for extreme design; that I chose his car as the first install to be featured on my site. There will be a new install posted there this weekend hopefully, if time allows; so be sure to check back.

Concerning the fiberglass enclosure in the tire well; yes it is very tricky to get the proper air space for the woofers. It is likely that Sabraj had to slightly raise the floor in the trunk to accomodate the 3 10W6's and provide sufficient air space. This is really not as hard of a task as it sounds. Basically you would need to make a wooden frame that outlines the trunk, and then place another piece of wood flat on the top of that frame and upholster. With some very slight modifications- you should have no problems running to Infinity Perfect 12.1's Floor Mount- with the required airspace.

I would personnally reccomend contacting Sabraj and see if he could also give you any pointers. His e-mail is oghabib@gte.net.

take it easy,

-zane

 

[alexlo 10+ year member]

Thanks a million Zane.