Reply to thread

Message

<blockquote data-quote="zane" data-source="post: 26687" data-attributes="member: 540617">Thanks for checking out my site.&nbsp;&nbsp; The Mustang shown there actually belongs to Sabraj Nijjar.&nbsp; &nbsp; I happened to have stumbled across his site <a href="http://www.oghabib.com" target="_blank">http://www.oghabib.com</a> while surfing one night and was so impressed with his talent for extreme design; that I chose his car as the first install to be featured on my site.&nbsp; &nbsp; There will be a new install posted there this weekend hopefully, if time allows; so be sure to check back.Concerning the fiberglass enclosure in the tire well; yes it is very tricky to get the proper air space for the woofers.&nbsp;&nbsp; It is likely that Sabraj had to slightly raise the floor in the trunk to accomodate the 3 10W6&#039;s and provide sufficient air space.&nbsp; &nbsp; This is really not as hard of a task as it sounds.&nbsp;&nbsp; Basically you would need to make a wooden frame that outlines the trunk, and then place another piece of wood flat on the top of that frame and upholster.&nbsp;&nbsp; With some very slight modifications- you should have no problems running to Infinity Perfect 12.1&#039;s Floor Mount- with the required airspace.I would personnally reccomend contacting Sabraj and see if he could also give you any pointers.&nbsp;&nbsp; His e-mail is <a href="http://mailto:" target="_blank">oghabib@gte.net</a>.take it easy,-zane</blockquote>

[QUOTE="zane, post: 26687, member: 540617"] Thanks for checking out my site. The Mustang shown there actually belongs to Sabraj Nijjar. I happened to have stumbled across his site [URL="http://www.oghabib.com"]http://www.oghabib.com[/URL] while surfing one night and was so impressed with his talent for extreme design; that I chose his car as the first install to be featured on my site. There will be a new install posted there this weekend hopefully, if time allows; so be sure to check back. Concerning the fiberglass enclosure in the tire well; yes it is very tricky to get the proper air space for the woofers. It is likely that Sabraj had to slightly raise the floor in the trunk to accomodate the 3 10W6's and provide sufficient air space. This is really not as hard of a task as it sounds. Basically you would need to make a wooden frame that outlines the trunk, and then place another piece of wood flat on the top of that frame and upholster. With some very slight modifications- you should have no problems running to Infinity Perfect 12.1's Floor Mount- with the required airspace. I would personnally reccomend contacting Sabraj and see if he could also give you any pointers. His e-mail is [URL="mailto:"]oghabib@gte.net[/URL]. take it easy, -zane [/QUOTE]

Verification