You think ill need any electrical upgrades?

[JuicyJeff 10+ year member]

Running an aq 1200d at 2 ohms doing 871 rms

and also running a cadence txa 3004.

Comes out around 1100 rms.

I have a stock bat and 110 amp alternator.

Thats how it is now. If and when i get that aq amp im going to do the big 3 and hope that makes a difference.

You think ill be alright?

Click to read more...

 

[FurbiesAndBeans 10+ year member]

Yea, u COULD get away with 4g but its safer if u run 0g. Do the big 3 and u should be fine.

 

[plugitin 5,000+ posts]

you shall be fine...

 

[JuicyJeff 10+ year member]

I just did a sigh of relief. how did you know i had 4 gauge weirdo

 

[JuicyJeff 10+ year member]

do you know how big of a fuse ill need to put inline from alternator to battery positive?

 

[lowriderram_95 10+ year member]

I was always told to match the rating of the alt so in your case a 110 amp fuse or as close as you can find to that

 

[JuicyJeff 10+ year member]

What size anl fuse should i use. Its going to be 0/1 g wire from knuconceptz with the anl inline fuse holder. What fuse should i use and should i put it closer to the batter or the alt? or does it not matter?

 

[JuicyJeff 10+ year member]

What size anl fuse should i use. Its going to be 0/1 g wire from knuconceptz with the anl inline fuse holder. What fuse should i use and should i put it closer to the batter or the alt? or does it not matter?

 

[JuicyJeff 10+ year member]

hmm... ive heard 150 amp fuse around places just wanted some backup on it

 

[Bender. 10+ year member]

I was always told to match the rating of the alt so in your case a 110 amp fuse or as close as you can find to that

your fuse size depends on the wire and that is all

What size anl fuse should i use. Its going to be 0/1 g wire from knuconceptz with the anl inline fuse holder. What fuse should i use and should i put it closer to the batter or the alt? or does it not matter?

you are going to need a fuse beside the alt and the battery

 

[Bender. 10+ year member]

I was always told to match the rating of the alt so in your case a 110 amp fuse or as close as you can find to that

your fuse size depends on the wire and that is all

What size anl fuse should i use. Its going to be 0/1 g wire from knuconceptz with the anl inline fuse holder. What fuse should i use and should i put it closer to the batter or the alt? or does it not matter?

you are going to need a fuse beside the alt and the battery

 

[JuicyJeff 10+ year member]

You think 150 would be the best or200. It's 0g wire