wuts wrong?

[Alaskan_awd 10+ year member]

man this is making me mad wut could cause this to happen?

If you have a multi meter, check your RCA's and check the outputs to the sub.

 

[blackbonnie 5,000+ posts]

what impedence are your subs wired too?

 

[CRAZYCORNUTS18 10+ year member]

i dont have one.....i would take it to the local shop to try and see if they can help but they charge 50 just to look at it

 

[CRAZYCORNUTS18 10+ year member]

what impedence are your subs wired too?

2 ohm

 

[blackbonnie 5,000+ posts]

and what subs do you have, and do they each have a 2 ohm load to the amp or is your amp bridged to a two ohm load?

 

[CRAZYCORNUTS18 10+ year member]

they infinity perfects they are 4 ohm subs and i dont have it bridged its one sub to one ch.......

 

[blackbonnie 5,000+ posts]

well you are only sending them 300 watts rms if that, i dont think that is enough power for those subs, but you should still get more then what you are out of them

 

[CRAZYCORNUTS18 10+ year member]

well i just bridged it at 2 ohm and it putting out about 800 but its sound like shit and dont hit at all

 

[CRAZYCORNUTS18 10+ year member]

bump plz help

 

[CRAZYCORNUTS18 10+ year member]

bump

 

[CRAZYCORNUTS18 10+ year member]

going to bed bump hope someone can help

 

[CRAZYCORNUTS18 10+ year member]

bump

 

[CRAZYCORNUTS18 10+ year member]

ima bout to go nuts and kick my subs in...iv tryed everything and they wont ****ing work right

 

[Qbenjamin 10+ year member]

Try a different amp. PA

 

[Pl8er 5,000+ posts]

I really think you have something messed up with the RCA's. What HU? Do you use only the non-fader RCA or are you using the others? Have you checked to make sure you don't have RCA plugged into the wrong things?

Have you checked the subs to make sure they are both plugged in (maybe one became loose during installation). It really either sounds like a filter not correct or a wiring issue (running the wrong ohm giving very low power).