WTB aero port...

[michaellane 5,000+ posts]

okay so is a 8' or 6' aero???? what do i need???? my box is

31' long

20' deep

14.5 tall

im running four 10's (they have a jl w6 first generation motor)

and i will be running 2000rms

so what aero and how long does it need to be?

also how long does it have to be also....

Click to read more...

 

[basscort2009 5,000+ posts]

like i said u could get away with 2 but optimal would be 4. let me calcualte u somthing with 2 4s and 2 6s

 

[basscort2009 5,000+ posts]

lol 36 htz needs to be 2 6" aeros 27 inches long each

36 htz needs ot be 2 4" aeros 11.8 inches long each

 

[michaellane 5,000+ posts]

okay. see the problem i think i will have is to do a blow thru two 6' aeros wont fit blowing thru the skipass hole in my seats. one will blow thru the other wont...do you get what im saying?

 

[michaellane 5,000+ posts]

lol 36 htz needs to be 2 6" aeros 27 inches long each
36 htz needs ot be 2 4" aeros 11.8 inches long each

you sure thats right? i was told one 6' areo about 10' long would be 36hertz?

man these aeros are killing me...

 

[basscort2009 5,000+ posts]

yes when u make more port area in aeros they need to be longer each time. so one 6 would be 12.08 actually and 2 would be 27 each. when the port gets bigger it needs to get longer to keep up in laymens terms (sp?)

 

[michaellane 5,000+ posts]

okay so will one 6' aero work? im trying to stay away from port noise also...

and if the flares are 5 inches long themselves and they is a flare on bopth ends then the pipe in between would only need to be 2 inches?

 

[basscort2009 5,000+ posts]

less port area gets more port noise. do 2 4s and be done with it. lol the 4 inch flares are 3" each. so both flares are 6"total. the extender on each port needs to be 5.8 inches long

 

[michaellane 5,000+ posts]

okay i will do two 4's. can they be mounted one on top of the other? or do they need to be spread out?

 

[basscort2009 5,000+ posts]

mine are one on top of the other

 

[michaellane 5,000+ posts]

do you think i will really get much noise? how much do these 4's cost? a single 6' is 38.00 //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[basscort2009 5,000+ posts]

i would sell u mine cheap if i didnt need them lol. on parts express its 26 shipped each. so like 52 for 2. or thriller audio is cheaper but i dont knjow how much shipping and tax is. might wanna check that out

 

[basscort2009 5,000+ posts]

do you think i will really get much noise? how much do these 4's cost? a single 6' is 38.00 //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

yes it is soooo annoying u have no idea until u know what chuffing and port noise is. i fixed it within like 5 minutes. i ripped the port out and redid it on the spot lol

 

[michaellane 5,000+ posts]

i would sell u mine cheap if i didnt need them lol. on parts express its 26 shipped each. so like 52 for 2. or thriller audio is cheaper but i dont knjow how much shipping and tax is. might wanna check that out

you sure one 6' wont cut it? am i getting more port with two 4's? well i guess so duh...man 52.00 that sucks

 

[basscort2009 5,000+ posts]

yea thats why i asked on here and got them cheap cuz thats some expensive *** plastic lol. and yes 6 will get some nasty noise

 

[michaellane 5,000+ posts]

yes it is soooo annoying u have no idea until u know what chuffing and port noise is. i fixed it within like 5 minutes. i ripped the port out and redid it on the spot lol

well that sucks. im just hoping i wont get any. i mean another guy one here is running the exact same thing and he didnt say anything...how did you fix yours?