WTB aero port...

[michaellane 5,000+ posts]

okay so is a 8' or 6' aero???? what do i need???? my box is

31' long

20' deep

14.5 tall

im running four 10's (they have a jl w6 first generation motor)

and i will be running 2000rms

so what aero and how long does it need to be?

also how long does it have to be also....

Click to read more...

 

[basscort2009 5,000+ posts]

more port area. i had one 4, sounded baaaad. added another 4 and changed lengths and poof. fixed. and was louder cuz more airflow

 

[SWFL 10+ year member]

a single 6" is more port area

also to figure out the port disp just take say for a 6" port 3x3x3.14x the length of the port/1728

 

[michaellane 5,000+ posts]

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=268-352

this is exactly what i need right?

 

[SWFL 10+ year member]

go with one 6" aero less disp and more port area

 

[basscort2009 5,000+ posts]

go with one 6" aero less disp and more port area

one 6 is about 25 inches of port area. not near enough for 4 cubes

 

[basscort2009 5,000+ posts]

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=268-352

this is exactly what i need right?

2 of those and ur set //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[SWFL 10+ year member]

one 6 is about 25 inches of port area. not near enough for 4 cubes

3x3x3.14=28.26

2x2x3.14=12.56x2=25.12

the 6" aero has more port area and will take up less disp for the box

 

[michaellane 5,000+ posts]

2 of those and ur set //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

you are 100% sure??? im about to buy them //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif also how long are they? i didnt see it on the parts-express page. so with the flares on them i need it to be 5.8' pipe in between them right? so 11.8 inches each?

 

[basscort2009 5,000+ posts]

3x3x3.14=28.262x2x3.14=12.56x2=25.12

the 6" aero has more port area and will take up less disp for the box

2 4s compared to 1 6. 2 6s would be too long so 2 4s wouldbe perfect.

 

[basscort2009 5,000+ posts]

you are 100% sure??? im about to buy them //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif also how long are they? i didnt see it on the parts-express page. so with the flares on them i need it to be 5.8' pipe in between them right? so 11.8 inches each?

yes i said that earlier //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif and the whole thing is like 17 inches each port so u have room to work with

 

[SWFL 10+ year member]

2 4s compared to 1 6. 2 6s would be too long so 2 4s wouldbe perfect.

that is 2 4's compared to 1 6"

what are u talking bout the 4's will be longer than the single 6"

 

[michaellane 5,000+ posts]

wow these are hard to tune...slots are so much better //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[michaellane 5,000+ posts]

that is 2 4's compared to 1 6"
what are u talking bout the 4's will be longer than the single 6"

explain...plzzz

 

[basscort2009 5,000+ posts]

that is 2 4's compared to 1 6"
what are u talking bout the 4's will be longer than the single 6"

4s would be longer but not too long. the one 6 would be shorter but not enough port area with just one.

2 4s would be ok port area. not great but decent. and are only 11.8 inches rather than the 27 inch 6s he would have to guid through the box

 

[michaellane 5,000+ posts]

everyone join in please! the more info the better