WTB aero port...

[michaellane 5,000+ posts]

okay so is a 8' or 6' aero???? what do i need???? my box is

31' long

20' deep

14.5 tall

im running four 10's (they have a jl w6 first generation motor)

and i will be running 2000rms

so what aero and how long does it need to be?

also how long does it have to be also....

Click to read more...

 

[basscort2009 5,000+ posts]

why does it say 4inch by 17inches? i thought i needed 6' by 17'?

im thinking of my setup oops. well get the 6x17 then. lol sry

 

[michaellane 5,000+ posts]

so it is 6' right? i linked one off parts express does that one seem okay?

 

[basscort2009 5,000+ posts]

yes the one on parts express is fine.

 

[mazdakid 5,000+ posts]

yea they got flares. and i got ur numbers by using the 12volt claculator and using .75 mdf. which was 4.1 so i gave it ,2 cubes for sub displacment. 3.9
then entered that into the psp inc. claculator with one 6" aero port and it gave me like 11.68. so yea you need boh flares and an extender about 6 or 7 inches long. (both flares are 6 inches total already.)

What about port displacement?

 

[basscort2009 5,000+ posts]

eh maybe another .1 id say.

 

[amartin_72]

What size is your box after sub displacement. how much power are you running in the ~5 cu ft box? If its over like 1500rms I dont think a 6 is enough thats only 8-9inches per cube. Why not go with an 8 for less $

 

[Bologna 10+ year member]

I got a 10' chunk of 6" PVC pipe

 

[basscort2009 5,000+ posts]

What size is your box after sub displacement. how much power are you running in the ~5 cu ft box? If its over like 1500rms I dont think a 6 is enough thats only 8-9inches per cube. Why not go with an 8 for less $

he said on there the dims. its like 4.1 before and 3.9 after displacment.

 

[michaellane 5,000+ posts]

okay so is a 8' or 6' aero???? what do i need???? my box is

31' long

20' deep

14.5 tall

im running four 10's (they have a jl w6 first generation motor)

and i will be running 2000rms

so what aero and how long does it need to be?

 

[michaellane 5,000+ posts]

someone give me a deff answer please on tunning

 

[michaellane 5,000+ posts]

What size is your box after sub displacement. how much power are you running in the ~5 cu ft box? If its over like 1500rms I dont think a 6 is enough thats only 8-9inches per cube. Why not go with an 8 for less $

explain please...

 

[basscort2009 5,000+ posts]

hmmm well with one 8 or even 2 6s its still not enough port area but u could get away with it im sure. slot port would be best in this case. aeros would have to be way to long to compensate

 

[michaellane 5,000+ posts]

what do you mean this is not enough port area??? bad @ss chevy did the same box with two 4' aeros and he said it worked out fine. how much port do i really need? i want to do it the right way...

 

[michaellane 5,000+ posts]

i cant imagine with a box this size i really need that much port??? can any1 just tell me what exactly i need?

 

[basscort2009 5,000+ posts]

u need about 12-16 inches of port area for each cube. so 4 cubes= 48-64 inches of port area. so to get that u need 4 4" aeros to get 50.24 inches of port area which is good.