Would this setup bump?

[Dwayne614]

I have 2 precision power SN.12s SVC (350rms 1200 peak only 4ohm) in a ported box. Thinking about getting a hifonics brutus BRX.2000.1D amp. Would it sound better if I get a single 12 inch DVC 2ohm in a ported box? It's in a 1992 chevy caprice. Any input is appreciated. Thanks

Click to read more...

 

[CSCStang]

I have 2 precision power SN.12s SVC (350rms 1200 peak only 4ohm) in a ported box. Thinking about getting a hifonics brutus BRX.2000.1D amp. Would it sound better if I get a single 12 inch DVC 2ohm in a ported box? It's in a 1992 chevy caprice. Any input is appreciated. Thanks

What's your budget? Put an hds312 on the brx2k in a custom ported........

 

[Dwayne614]

What's your budget? Put an hds312 on the brx2k in a custom ported........

Don't really have a budget. And crazy thing is someone in my cities' Craigslist is selling 2 of those subs in a sealed

 

[CSCStang]

Don't really have a budget. And crazy thing is someone in my cities' Craigslist is selling 2 of those subs in a sealed

What a shame in a sealed. Grab 'em and throw them in a ported man.

 

[C1500martin 10+ year member]

A single 15 in a proper ported with that brx will "bump" but so will a 12 but once again in the PROPER ported enclosure

 

[Dwayne614]

Thanks guys. Does anyone know where to get good quality 0 gauge wires with fuses for cheap?

 

[CSCStang]

Thanks guys. Does anyone know where to get good quality 0 gauge wires with fuses for cheap?

KnuKoncept.com.

 

[shizzzon 10+ year member]

Welding cable is cheaper.

Fuses can be purchased on ebay or other places for less than Knu.

Empire W&S is the cheapest annual carrier for welding cable.

Other places may do massive discounts every now and then but they are the cheapest consistent retailer.

 

[Dwayne614]

Found this setup for $250 with 0 gauge. What do you think?

Subwoofer and Amp

 

[hispls 5,000+ posts]

I'd avoid PPI subs.

 

[Popwarhomie 5,000+ posts]

Welding cable is cheaper.Fuses can be purchased on ebay or other places for less than Knu.

Empire W&S is the cheapest annual carrier for welding cable.

Other places may do massive discounts every now and then but they are the cheapest consistent retailer.

Where are you finding welding cable cheaper than KNU?

 

[Dwayne614]

What size ANL fuse would be appropriate for the brx @1ohm?

 

[Dwayne614]

Bump