Wiring help, Need to re-connect my amp!!

[burtonbrdr]

So I've had a lot of problems in the past with car audio stuff. Most of the time I have a shop install the sub and amp because I really have no idea what I'm doing. 4 years ago I tried connecting my amp after I took it out of my car for room issues, and just tried to stick the wiring right in without disconnecting the battery. Sparks went flying and I decided to never do that again. Now I thought I learned my lesson, I unhooked the wiring from the battery before connecting my amp, and then connect the wiring to the battery. In the past when I did this it just sparked and killed my car, a simple jump later and everything was good. I tried this again today and it seems there is no power to my amp at all when I turn the car on. There is some Tsunami fuse underneath my hood and it looks like its blown. Anyone know how to properly install these darn things without blowing something? And where I can buy a new fuse and how to install that? Thanks!!

Click to read more...

 

[keep_hope_alive Premium Member]

well my friend, you have some research to do. we can guide you to the right direction, but reading is the best bet. start by reading owner's manuals for amplifier installation instructions.

i created this thread for references and web links

http://forum.sounddomain.com/ubbthreads.php/ubb/showflat/Number/1318392/page/1#Post1318392

you must always make sure to not mix up power and ground at the remote. that is #1.

you shouldn't get a spark when you connect an amp, at least not one that kills the car. that sounds like a dead short.

i suggest you replace your power wire, or at least remove it to inspect for any damage. how is it routed? if it's through the door jam, you must replace it.

the fuse type depends on the fuse holder. take pics of it and we can tell you what kind it is and how to replace it.

this is why it is worth it to pay a shop, they save you time and money.