Wired my amp, Wont turn on!

[daboyfrumdabx 10+ year member]

The one that looks like a greek omega symbol. Neg to battery neg and positive to the actually point on the chassis that you are grounded to.

 

[Imtjnotu 5,000+ posts]

What gauge is your power wire

 

[audiobaun 5,000+ posts]

What size fuse you using at the power supply at the battery also??

 

[CrossoverOre 10+ year member]

Hey guys i noticed the amp turn on 12 v+ wire was going into the only plug that was hanging free.. lol
so i took my remote off of that wire and put it into the power antenna, now my amp is working.

The only problem i notice now is when i turn on AND turn off my radio, i get a single burst of bass like feedback or something. the only way i can avoid this is by turning the SubWoof option OFF immediately upon turning on my radio and before i shut it off?

Not sure why i am getting this feedback, everything is clear sounding besides that.

Thanks for all the help, any ideas why this feedback noise is coming lemme know!

thanks

nate

i have found this typically happens when the amp turns on before the deck fully powers up and that pop is the deck signal turning on.

 

[silvercookie 5,000+ posts]

wrong. Solid blue is power ant. Blue w/ white stripe is amp turn on. Amp turn on's usually have less than 1a tolerance might have burned it up.

Not on my Pioneer.