will this box design work

  • 2
    Participant count
  • Participant list

redfish8

Banned
222
0
us
this box i am attemtping to make is for 2 12's l7's

i want each sub to have 2.6 net and the box tuned to 33hz so will this work

internal measurements

24.5x29.5x15.5=6.5

minus .20 for sub displacement

leaves 6.3cuft

port size 15.5w x 4.75 x 24.5 and the lip on the end should be 2inches high so 22.5long and then the lip comes up 2 inches

minus 1.04 for port leaves 5.2cu ft

equals 2.6cu ft per sub net

will that work and equal a 33hz tune

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

The it to a custom air brush guy and tell him what you want. You can always stain, plexiglass windows, and put led lights inside the box. Search...
6
413
Thanks man! Quitting drinking and battling DRESS syndrome has given me a new outlook on life.
8
766
I've used that driver and the ported box is closer to about 2 cubes. We did 1 in a stuffed/sealed 1-1.25 cubic foot box, stuffed with 1 lb of...
2
713
People didn't like ported boxes because the port noise and needing a bigger box. Therefore, instead of 1-sub in a ported, they would go with...
30
3K

About this thread

redfish8

Banned
Thread starter
redfish8
Joined
Location
us
Start date
Participants
Who Replied
Replies
2
Views
793
Last reply date
Last reply from
IDSkoT
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top