will someone tell me how big to make my ports?

[twistedmind 10+ year member]

internal box volume

2.314 cubic feet

this is including sub and bracing displacment, it is NOT including port displacment

I want to end up with 32 hertz

and I am going to probably need to run 2 ports because of the way the box is designed.

FI recommends 12-16 inches of vent per cubic foot of volume.

I was thinking 2 ports with 4.5 X 6.5 OD, how long would they each need to be to get to 32 hertz?

It is going to have to be fabricated in a square L7 style. I don't have a MDF wall to make a side from.

Thank you in advance for any help.

Click to read more...

 

[twistedmind 10+ year member]

box is 6x30 inches on top where the port or ports will go, and 21" H outside measurments.

bottom is 11 X 30

 

[9seconlives 10+ year member]

It would be easier to see a pic/drawing of the box and if you in or near houston then hit me up and we'll get you rockin bro....

 

[twistedmind 10+ year member]

It would be easier to see a pic/drawing of the box and if you in or near houston then hit me up and we'll get you rockin bro....

corpus christi sadly, ill get a pic up tonight

 

[twistedmind 10+ year member]

 

[twistedmind 10+ year member]

 

[Techchild 10+ year member]

Thats what I used //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

http://www.carstereo.com/help/Articles.cfm?id=31

 

[twistedmind 10+ year member]

im coming up with 4x6x23 ID, can anyone verify this for me?

should be 32 hertz

edit: or would 4x7x24 be better? box is only 28.5 long on the inside where want my port

whats the difference between a slot port and a square port because the difference in length is 5 inches