wifes car wants to stall and backfires

[pioneerpimp 5,000+ posts]

it's not recommended that u run SEAFOAM unless ur going to change ur 02 sensor after u run SF, which u have done already. Start off ez, check the plugs, and make sure all the wires are connected and no bare wire showing. Then move on.

where did you hear this at? i know ALOT of people that run SF without changing there 02 sensors.

could be plugs, wires, distributor and/or rotor. cattlytic converters, vaccuum, gaskets...alot of things

 

[dman4486 5,000+ posts]

it's not recommended that u run SEAFOAM unless ur going to change ur 02 sensor after u run SF, which u have done already. Start off ez, check the plugs, and make sure all the wires are connected and no bare wire showing. Then move on.

lol.....find me a reference because I do not believe you. I have used it quite a few times on more than just my vehicles and never once changed any O2 sensors.

The can says nothing of the sort and SF does not have any bi-products that will cause harm to the ceramic nor platinum in an O2 sensor.

 

[sexiewasd 10+ year member]

If the CEL does not turn on then your car has some serious ECU issues, or the CEL's bulb is toast, or removed. It should be throwing rich codes, and misfire codes at least.