I was given a DubAudioMag bass tube. Its hold an 8inch subwoofer and is powered by its own amp(attached to back of basstube) but the wiring harness has been lost. It doesnt have the traditional wire terminals for power ground and remote. Its has a plug intead that has the ground n remote n positive all together. So i removed the back of bass tube to access inner amp wiring n tapped into the negative and positive and remote n ran wires out of enclosure through a small hole i drilled. Then when i began to wire it in the vehicle. I only got the positive connected and then the remote and the blue light came on (power indicator) but the ground wire is not hooked to nothin. So basically the amp is powering on with out a ground. Why ?
Last edited: