which would you run

[Jduane]

I have 5 cubes to work with, being installed in wedge behind rear truck seats.

how much room should I leave between subs and seat ? 1" is about all I have

now want to pick

3 hdc3 10's

3 torox10's

2 hdc3 12's

Click to read more...

 

[big scott]

I have 5 cubes to work with, being installed in wedge behind rear truck seats.how much room should I leave between subs and seat ? 1" is about all I have

now want to pick

3 hdc3 10's

3 torox10's

2 hdc3 12's

out of them i would do the 3 sq 10" more cone .

and you really want more then 1" from anything to sub.

i would try and do a higher box and take a little out of the depth .

 

[Jduane]

1" would be after full excursion and i only have 12" depth. that's after i raised 2" and moved the seats forward 2"

 

[big scott]

ok well if thats all you can do....

just make sure it will not hit..

go with it.

is this a ported box ? are you going to make the box ?

 

[Jduane]

im gonna take the max area (5cubes) split it into 3 boxes figure out aero port length

amp brx2400 strapped

 

[Popwarhomie 5,000+ posts]

Depends on how much power you have.

I ran 2 HDC3 10"s on an AQ3500 in my truck years ago. It was pretty loud. 3.12 cubes net tuned to 35hz.

 

[Jduane]

if i do hdc3 10's should i go

d1 at 1.5 ohms or

d2 at 3 ohms strapped

 

[Jduane]

strapped would be about 2400 watts probably a little over rated

 

[Jduane]

lol 3200 at 2 ohms

 

[Jeffdachef 5,000+ posts]

I have 5 cubes to work with, being installed in wedge behind rear truck seats.how much room should I leave between subs and seat ? 1" is about all I have

now want to pick

3 hdc3 10's

3 torox10's

2 hdc3 12's

With 3 10s, you'd want around 117 square inches port port area

With 2 12s, you'd want around 113 square inches. Make sure you have enough NET cubic feet after accounting in displacement of port, sub and bracing.

If you have 5 cubes gross, you might only have enough space for two 10s in optimal enclosures.

 

[Jduane]

someone suggested using external flared aero ports. if i use 3 10's strapped i can use a common box to get another .5 cubes.

any other ideas spl in mind

 

[Jeffdachef 5,000+ posts]

someone suggested using external flared aero ports. if i use 3 10's strapped i can use a common box to get another .5 cubes.any other ideas slp in mind

external flared aeros will do the trick.