Which subs? Type R, FI, AQ?

[Cruzer 10+ year member]

Thanks Corrie I am leaning towards 2 15" FI SSD's. I believe they are rated at 800 RMS each from a little browsing. So that would actually be a good match for the amp I have. Now I just need to find 2 SSD's I can wire down to 1 ohm here on the forums. I don't believe FI sells them anymore?

They most deff do...

https://ssl.perfora.net/www.ficaraudio.com/sess/utn;jsessionid=154c55e5170ee33/shopdata/0050_Speakers/0040_SSD/product_overview.shopscript

 

[Wolverine19D 10+ year member]

thanks again! So I did some measurements and I have 35 1/2 inches width by about 32 inches debth i can use. Height dont matter much but under 24 inches would be nice. So I am thinking 1 18" and 1 15" SSD FI subs. Would there be any problem with mixing up the sizes and using the same amp? They are rated the same at 800 RMS so I would think everything would be OK. But can I get enough space using those dimensions above for a ported box with these subs? The site recommends 3-4 cuft on the 15 and 6-10 on the 18. I will try looking it up and seeing if thats enough. If so and you guys think it'll sound OK by mixing up the sub sizes I think I will go this route and have someone design me a box I will build myself.

Thanks guys, you've been a huge help.

 

[robertark 10+ year member]

I have two Type-R 12's @ 1500w RMS. They're "ok" -- but expected better (I have high expectations, these subs didn't exceed or meet my expectations). Nonetheless, they're great mid-level subs, I guess... Next subs will probably be some Fi BTL's.