which is better

[CalSpecBoy 10+ year member]

For two 12'' Infinities??

-----------------------------------------------------------

Sub sepcs.

Power Handling, RMS: 300W

Power Handling, Peak: 1200W

Frequency Response (±3dB): 22Hz - 800Hz

Sensitivity: 92dB

Mounting Depth: 6-1/8"

Impedance: 4 Ohms

-----------------------------------------------------------

This one?

BOSS RIP-595

1,000 Watt 2 Channel Amp w/ VU Meters

RMS: 210 Watts per Channel @ 4 Ohms

Bridged Power @ 4 Ohms -1,000 watts

-----------------------------------------------------------

or this?

2 Channel Boss Klash K580

Max Power @ 2 Ohms – 450 watts x 2

RMS power @ 4 Ohms - 170 watts x 2 RMS

Bridged Power 900 watts x 1

Click to read more...

 

[denim 5,000+ posts]

can I say neither, pleasse stay away from cheapo companies like Boss

 

[CalSpecBoy 10+ year member]

what would be a good one for my subs then? they are mounted in parallel if that makes a diff. I dont have a lot to spend though. like 200 max.

-BrandonB

 

[denim 5,000+ posts]

tahts a very tight budget to find a decent amp for 600watts, check ebay first

 

[CalSpecBoy 10+ year member]

Quick question when they say bridged what do they mean??

 

[playa1 10+ year member]

200 bucks you say?? http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=12303

or

http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=12302

 

[CalSpecBoy 10+ year member]

I think I shall take a closer look at these thanks guys! keep coming up with suggestions if you can!

 

[CalSpecBoy 10+ year member]

would a Lanzar VIBE 258 be a good amp for my 2 12's?

2 x 400 Watts RMS at 4 Ohms

2 x 800 Watts Max at 4 Ohms

1 x 1600 Watts Max at 4 Ohms Bridged

2 x 650 Watts at 2 Ohms

 

[playa1 10+ year member]

That amp doesn tput out the rated power.Use the soundstreams they are quality stuff.Also they are good prices.

 

[CalSpecBoy 10+ year member]

ok cool I'll get one of the sound streams soon prolly.

 

[80_Cutlass_mn 10+ year member]

Also take a look at Profile California CA1200.

http://www.etronics.com/product.asp?stk_code=proca1200&store=&catid=308

http://cgi.aol.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3069922446&category=18796

Im sure there are more places that sell them. They are very reliable amps and put out their rated power.

Also about what Playa1 said, the Vibe 258 wont put out the full 400 watts rms at 4 ohms but im sure it would do at least 300. My friend has one of these amps on his two Premier TSW125DVC's and those things wang like a mofo on it. The only thing about these amps is they dont really like high power hits like really low frequencies that require alot of power, his starts to clip slightly on the really low frequencies like around 30 hz and below but its still a good amplifier. For the price its a very good deal.

 

[CalSpecBoy 10+ year member]

What does it mean when they say "Bridged"?

 

[Cantaffrdspeaks 10+ year member]

PIONEER GM-X862 440Wx1@4 ohms r.m.s.

$181

 

[Bumpin-dah8o8 10+ year member]

when ever they say bridged it refers to a 2 or multi channel amplifier, basically it means that you take the + from the 1st channel and the - from the 2nd channel ( usually on most amps)which increases the power. the reason being is that the frequencies produced by thoose 2 channels are used to power speakers like your tweets or mids and highs, but when you bridge the channels it becomes a mono amp which is meant for subwoofers which run at lower frequencies. hopefully that helped... Joe

 

[DBfan187 5,000+ posts]

www.the12.volt.com = the answer to some/most Car Audio question!