here is my problem I have a JL 500/1 which is going to run my subs (boston pros) and I have kappa 5x7s in the doors reference 5 1/4 in the back dash I plan on running the speakers in the back off the deck and as for the fronts my choices are ppi pc2100 ppi pc2300 alpine v12 mrv-t407 or should I buy a 4 channel amp to run both sets the alpine is brand new so I don't know how good it will sound the 2100 sounded good to the kicker seperates I had in my old car if anyone has a suggestion it would be helpful
-
1Participant count
-
Participant list
Activity
No one is currently typing a reply...
Similar threads
It's fine to mount to the box. A lot of show car SPL setups have amps or other electronics mounted directly to the wood frame of the box or on an...
- Started by Denial-
- General Car Audio 2
How I would approach it is install your new amplifier and start using it.
Install a voltage gauge and if you see your voltage lowering then add...
- Started by Ellessucs
- Wiring, Electrical & Installation
Additinally, no need to reference "max" anything as those specs are useless. Most of know how to look at specs for a given speaker, amp, HU, etc...
- Started by Shomik Afi
- General Car Audio
Hello all. Used to come on these forum quite a bit. I used to compete in IASCA MECA etc. and placed 1st 2x with this setup. Anyway this is my baby...
- Started by strkrfan13
- Car Audio Classifieds
You don't need two amps. The speakers come with crossovers to help protect the tweeters.
- Started by loudcaprice5
- Speakers
About this thread
New threads
-
-
-
-
Head unit 1 output rcas, to 5 channel amp, LOC or 1 set off HU
- Started by RyanJ0022
- Replies: 6
-