Which amp for my sub - Im new

Hey, just joined the board looking to expand the lack of knowledge I have on car audio. Anyhow I just bought a Kenwood KFC W 2505 10" subwoofer, already in a box. It has a power range of 35-300 watts RMS, peak power 600 watts and a frequency range 28-800 Hz. I really have no clue what half of that means, and I need to buy an amp that will power it correctly. I've heard you can ruin a speaker by under powering it, and the obvious by over powering it. Can anyone help me out, and suggest a common amp that I should be able to find in Canada that will suit this sub? All/any help appreciated, thanks in advance.

 
ditto, looking at what ya got it looks like you might be on a budget is it single 4 ohm?, if so look for an amp that does 300-400 watts rms, look on ebay and try and find a kenwood amp i think theres a few that will do that power and dont cost much oh and by the way you cant ruin a spaker by underpowering it and a bit

//content.invisioncic.com/y282845/emoticons/wave.gif.002382ce7d7c19757ab945cc69819de1.gif to ya and welcome to the forum //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
//content.invisioncic.com/y282845/emoticons/imo.gif.3a57bcc70a4835dc53e86ffae1a0b041.gif//content.invisioncic.com/y282845/emoticons/yes.gif.2d6d3882a589966b8145fbc57db57f33.gif//content.invisioncic.com/y282845/emoticons/iagree.gif.15d6c075ee8d3913ba26866d06993068.gif
//content.invisioncic.com/y282845/emoticons/iagree.gif.15d6c075ee8d3913ba26866d06993068.gif i had a profile worked awesome for a starter amp

 
Dont mean to hijack thread but...

//content.invisioncic.com/y282845/emoticons/iagree.gif.15d6c075ee8d3913ba26866d06993068.gif i had a profile worked awesome for a starter amp
very good beginner stuff. higher quality and 1\2 the price than you will pay at a local shop for sure.
Are profile amps pretty good? I just bought an 12" DVC (4 ohms) Kicker 05CVR124 that does 400 rms and I am looking for a relatively inexpensive amp...

I was thinking about maybe a Profile CL600M (note: I would be buying off of ebay NOT crutchfield). What do you think?

 
I just bought a profile ap1000m. this amp is awesome. love it...i have no regrets. dosent get hot hardly at all. it'll do all 300 watts it says it'll do and more.

 
i got a barely used profile cl1200 for sale, look in the used car audio classifields, ill sell it to u for 120, but u will have to pay shipping

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

One or two, they are still subwoofer outs and are mono summed signals from both left and right. Even the 2 RCA subwoofer pre-outs on the 2nd one...
3
677
Using a Y RCA to split signal from amp to amp to give both amps the signal they need from the HU and subs in different /separate enclosures tuned...
3
773
Hahaha his brother got some from a friend. American bass amp and some alpine s 12in subs. From a buddy of his now Eastons chomping at the bit...
9
779
Hello all. Used to come on these forum quite a bit. I used to compete in IASCA MECA etc. and placed 1st 2x with this setup. Anyway this is my baby...
0
797

About this thread

MitchellCamaro

Junior Member
Thread starter
MitchellCamaro
Joined
Location
Brantford, ON, Canada
Start date
Participants
Who Replied
Replies
19
Views
1,142
Last reply date
Last reply from
Harrison486
1717274743729.png

Doxquzme

    Jun 1, 2024
  • 0
  • 0
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0

New threads

Top