Where should I add bracing?

[Pyro_By_Nature 5,000+ posts]

what directory # does that explain in?

110

 

[45auto 10+ year member]

Hey, Raisedin305, I sent you a PM concerning the amp, please reply.

 

[Raisedin305 5,000+ posts]

Hey, Raisedin305, I sent you a PM concerning the amp, please reply.

Replied.

 

[ramos 5,000+ posts]

Let's compare a little

In this picture, the braces are at least twice as wide as the thickness of the wood. Correct ?

What happened in the translation to this ?

I understand the bracing in the plans that moe provided you. The bracing configuration will work if constructed properly my man. You could brace it with 10" thick titanium bars if you want. But what good is the strongest bracing in the world if the enclosure it's in isn't up to par. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[btnhfan 5,000+ posts]

Do threaded steel rods from one side to the other.

 

[2loud4u 10+ year member]

Do threaded steel rods from one side to the other.

that is what i did for my 3 cubes at 35hz for my RE MT.

It takes away almost no airspace .

 

[btnhfan 5,000+ posts]

Yup and you cant get anything stronger.

 

[CJL 10+ year member]

Do threaded steel rods from one side to the other.

Is there a site that carries them?

 

[2loud4u 10+ year member]

you can get them at any building store.

Same place where you get your mdf

like btnhfan said nothing stronger.

Also you dont have to worry about about the displacement of them cause they take up so little it dont affect anything.

just make sure you use silicone to seal each end where it goes through the box.

Only bad thing is that u can see them and some people dont like it.

 

[btnhfan 5,000+ posts]

Home depot sells them.

 

[CJL 10+ year member]

do they come in certain sizes

 

[CJL 10+ year member]

and does anybody got a nice pic of what they look like

 

[JL12W7INAGS300 10+ year member]

a pic of what threaded steel rods look like? **** homie

 

[Raisedin305 5,000+ posts]

a pic of what threaded steel rods look like? **** homie

Same thing I was thinking:laugh:

 

[CJL 10+ year member]

i said that mainly to see what would be on each end of the rod I know what a steel rod looks like //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif