What subwoofer to use with this enclosure?

[fly_marlin]

M1d | DD Audio

 

[LosIsATool 5,000+ posts]

link for the DD M1? 800 was a rough figure i gave, figure there is some wiggle room in there.

They just did a update right after I got mine. Added features to the remote.

 

[brewmastr]

ok so just went out and took a measurement of the spot i want to use to mount the amp, and i dont know why i was tripping so much, but its got a 19" width area to work with and about 16" in length, so i should be all good, any authorized online sellers for the DD M1?

 

[fly_marlin]

ok so just went out and took a measurement of the spot i want to use to mount the amp, and i dont know why i was tripping so much, but its got a 19" width area to work with and about 16" in length, so i should be all good, any authorized online sellers for the DD M1?

I am not sure, but I don't think so. If they're anything like ARC, they only allow internet sales from their website, where you pay MSRP. Everything else must be locally purchased. See if you can find a dealer in your area on their site. I'd call if you and if they try to charge you too much, I'd just get something else. Maybe you can get a package deal where they'll do the install for less, too. Unless you're installing yourself.

 

[brewmastr]

Yeah im planning on doing the install myself, its very straight forward install, i am a technician for a living for mercedes-benz so the install is not the hard part, one question i have is the lc2i has a bass knob on it and so do many of these amps, im assuming using the amps control rather then the lc2i is a favorable choice? Also when it comes to tuning an audio setup im not very well versed on that either... but that may be another subject for when the actual install is complete.

 

[fly_marlin]

Yeah im planning on doing the install myself, its very straight forward install, i am a technician for a living for mercedes-benz so the install is not the hard part, one question i have is the lc2i has a bass knob on it and so do many of these amps, im assuming using the amps control rather then the lc2i is a favorable choice? Also when it comes to tuning an audio setup im not very well versed on that either... but that may be another subject for when the actual install is complete.

Should be pretty straight forward here, you'll be done in 5 mins. LPF at 80Hz, HPF at 120Hz. Hope your amp has a subsonic - that one you set once you know the box tuning frequency. Forget exactly, but I think rule of thumb was 1/3 octave below tuning frequency. Adjust HPF and LPF to your liking as you listen to songs you're familiar with.