what do you all think about this?!??!?

[pro-rabbit 5,000+ posts]

I would rewire it as you made an error some where.

Take your DMM and test each coil..then wire them to 8 ohm per driver then wire it to a 2 ohm load.

 

[05trailblazer 10+ year member]

no my amp is 2ohm load, but the way i have it should be about 2ohms if not 1.5 and each pair of subs say 2.1 or 2.0

if u have 4 dual4ohm subs and u got a 1ohm load from them. I would start checking all the coils independently. U got a bad coil somewhere. But to answer the other question if u meant to get a 1ohm load and ur amp is only 2ohm stable after box rise, and all you will be very close to a real 2ohm load prob a good bit higher then 2ohm thus no more issue

 

[05trailblazer 10+ year member]

let me gh ahead and remove them from the box and test each coil then

I would rewire it as you made an error some where.
Take your DMM and test each coil..then wire them to 8 ohm per driver then wire it to a 2 ohm load.

 

[pro-rabbit 5,000+ posts]

no my amp is 2ohm load, but the way i have it should be about 2ohms if not 1.5 and each pair of subs say 2.1 or 2.0

If each sub shows 2 ohm then you have subs wired in parallel. There is no way to take 4 2 ohm subs to make a 1 ohm load. This means you have made an error while wiring.

Take some pics of the wiring and perhaps we can spot something you are over looking.

 

[akheathen Premium Member]

lol, sounds like worded wrong..... he means each pair of coils (each sub) reads 2ohms, i think

 

[05trailblazer 10+ year member]

yea that is true bro let me check em out be back in a bit thanks all for the quick input!!//content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif

If each sub shows 2 ohm then you have subs wired in parallel. There is no way to take 4 2 ohm subs to make a 1 ohm load. This means you have made an error while wiring.
Take some pics of the wiring and perhaps we can spot something you are over looking.

 

[05trailblazer 10+ year member]

no both subs already wired say 2ohms individual sub say 4ohms

lol, sounds like worded wrong..... he means each pair of coils (each sub) reads 2ohms, i think

 

[disturbed471985 5,000+ posts]

2 dual 4 subs cant be wired to a 2ohm load. U got issues somewhere.

 

[pro-rabbit 5,000+ posts]

2 dual 4 subs cant be wired to a 2ohm load. U got issues somewhere.

He has 4 D4s at least that is what I think he has.

If he does have 2 D4s then there is no way to get a 2 ohm load.

 

[05trailblazer 10+ year member]

let me try some last thing that i think iam doing wrong hold up ill be back

2 dual 4 subs cant be wired to a 2ohm load. U got issues somewhere.

 

[Imtjnotu 5,000+ posts]

check ur wiring juan...something isnt right with it....also do u have a terminal cup?

 

[05trailblazer 10+ year member]

nvm it still say two subs are 2ohms im sure im doing it right its not the 1st time doing this.

 

---------- Post added at 11:42 PM ---------- Previous post was at 11:42 PM ----------

 

i just did mr. monkey and im wiring them right from the subs terminals

check ur wiring juan...something isnt right with it....also do u have a terminal cup?

 

[disturbed471985 5,000+ posts]

He has 4 D4s at least that is what I think he has.
If he does have 2 D4s then there is no way to get a 2 ohm load.

no both subs already wired say 2ohms individual sub say 4ohms

I thought he was talking about 2 d4's since he says both subs wired together give him a 2ohm load.

 

[05trailblazer 10+ year member]

guys i think i just solved the da.mn problem im sometimes ina another world. so much has happen to me today fml

 

[Imtjnotu 5,000+ posts]

u wired it up wrong?