Tenacious
Banned
I just had to after I saw people recommending amps that were 2 ohm stable.. LolI was just about to say that. Lol beat me to it.
I just had to after I saw people recommending amps that were 2 ohm stable.. LolI was just about to say that. Lol beat me to it.
Whats the condition it is in?$120 Shipped
Yes, the amp will work with your setup. The PDX's are nice amps and $120 shipped doesn't seem like a bad price either (assuming it's in decent condition and has the speaker plug).Whats the condition it is in?
also can someone confirm that this pdx 600.1 will work for my subs? and for the wiring would that crutchfield link be the best? i looked into more diagrams and it seems you linked me is for low impedence and theres one without low imp. just want to confirm things before i spend any wasteful money
In a sense yes, in a sense no. That amp is only 2 ohm stable, and you can only wire your subs at either one or four ohms. So you'd have to wire at four ohms and you'd be getting 300w out of it. Personally if recommend something different in your case.Whats the condition it is in?
also can someone confirm that this pdx 600.1 will work for my subs? and for the wiring would that crutchfield link be the best? i looked into more diagrams and it seems you linked me is for low impedence and theres one without low imp. just want to confirm things before i spend any wasteful money
Aright what would you suggest? Im open to any suggestionsIn a sense yes, in a sense no. That amp is only 2 ohm stable, and you can only wire your subs at either one or four ohms. So you'd have to wire at four ohms and you'd be getting 300w out of it. Personally if recommend something different in your case.
I'd stay away from that brand. If your budget is small you could get a Hifonics BRZ1200 or Audiopipe APSM1300 and run them at 1 ohm with the gain turned down.Aright what would you suggest? Im open to any suggestions
Also would this amp SoundStorm (SSL) EV1500M work?
Evolution Series Single-Channel Class AB Car Amplifier
RMS Power Rating:
4 ohms: 600 watts x 1 chan.
2 ohms: 900 watts x 1 chan.
Max power output:
2 ohms: 1500 watts x 1 chan.
MOSFET PWM (Pulse Width Modulated) power supply)
Wired remote bass level control included
Power and protection LED indicators
Variable tuned bass EQ (0-18 dB bass boost)
2 Ohm stable
1 channel monoblock operation
Selectable input sensitivity (100mV-2V or 2V-8V)
Thermal and speaker short protection
Soft turn-on circuit
Remote turn-on/turn-off circuit
Variable input gain control
Dark gray anodized heatsink
Large aluminum heatsink for excellent heat dissipation
Nickel-plated RCA level inputs
Nickel-plated screw terminals
Variable low-pass filter (45-90 Hz, 12 dB/octave)
Frequency response: 9-90 Hz
Dimensions: 10"D x 15-1/2"W x 2-3/8"H
1/0-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
Authorized Internet Dealer
1-year Manufacturer's warranty
Or is it a bad brand amp? Thank you for any suggestions/help! Really appreciate it guys.