want to build a triangular box for 3 re 8's

[Travman 10+ year member]

i am looking to build a ported triangular box for my 3 re 8's.I was wondering if someone could draw me up some plans for the box,or give me some tech specs.Trav

Click to read more...

 

[betteraudio 10+ year member]

Can do.

Email me dim's of space available for enclosure and the woofer specs, and I can draw you something up in autocad.

Hard to see on my end, but "Email me" is actually a link to my email address.

 

[Travman 10+ year member]

Well here are the specs of the sub.As for the box size i'd like to make it 1.5 cubic feet (0.5 is recommended per sub) and then have it like 12" tall and 12" along each side.Im open to just about any box ideas though.

RE SERIES

Product Dimension8"

Mounting Depth - 4"

Mounting Hole Diameter - 7.125"

Overall Diameter - 8.25"

Bolt Hole Circle - 7.75"

Motor Width - 4.875"

Motor Depth - 1.5"

Basket Depth - 2.5"

Displacement - 0.07 cu. ft.

Weight - 6 lbs

RE SERIES

T/S Parameters8"

Electrical Q Value -Qes: 0.38

Mechanical Q Value -Qms: 4.21

Total Speaker Q Value -Qts: 0.34

Free Air Resonance -Fs: 22.8 Hz

Equivalent Compliance -Vas: 27.1 liters

One-Way, Linear Excursion -Xmax: 12 mm

Efficiency -SPL 1W/1m: 81.2 dB SPL

Effective Piston Area -Sd: 195 cm^2

DC Resistance -Re: 3.2 ohm

Nominal Impedance -Znom: Dual 4 ohm

Thermal Power Handling -Pe: 175 W

Force Factor -Bl: 15.4

 

[betteraudio 10+ year member]

Alright, well just in case this thread gets buried, shoot this info over to me in an email, and I will work on it later today. Just had a wisdom tooth pulled, and I'm a little out of it right now.