Walling off my car, part 3 (the rebuild)

[baseballer1100 5,000+ posts]

Im loving those cuts.

 

[CBFryman2 5,000+ posts]

Won't be there, no BTL... but I'd be down for a little competition //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
The same mic is used at the shows I go to... I don't think I'd have a problem hitting a 160 on it... I hit a 148.1 with my trunk install, lawl

My head isn't getting big, I'm just getting excited

Well when you do go to compeat. 10 CVR 10's and 10,000w in a black S-10.

I'm not saying you have a big head. I'm saying to make sure you dont. I got a big head when I installed my Ava18 and I was the loudest in my school...well I'm still the loudest in my school. //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[saywhat? 5,000+ posts]

Im loving those cuts.

i do too man, i want to go that route for local builds...

 

[baseballer1100 5,000+ posts]

Well when you do go to compeat. 10 CVR 10's and 10,000w in a black S-10.
I'm not saying you have a big head. I'm saying to make sure you dont. I got a big head when I installed my Ava18 and I was the loudest in my school...well I'm still the loudest in my school. //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

I have found that not hard to do with some of the idiots at my school.

 

[baseballer1100 5,000+ posts]

i do too man, i want to go that route for local builds...

I wonder what they use? I mean i have a good idea. but like what setup exactly.

 

[Kenny Pollock 10+ year member]

I'm gonna find out more about the cabinet shop's setup... but I asked him about doing this more frequently for me, and he said he'd charge less and less everytime I revisit.

I'm thinking about taking measurements for local kids systems and having Grant design a nice box... taking the cut sheet over to this guy and setting it up. Great way to gain experience and make a few bucks.

CB: I have been the loudest at my school since the SX and Orion 1200D, it no longer means nothing to me //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif I can't wait to start offering hair tricks though.

 

[baseballer1100 5,000+ posts]

I'm gonna find out more about the cabinet shop's setup... but I asked him about doing this more frequently for me, and he said he'd charge less and less everytime I revisit.
I'm thinking about taking measurements for local kids systems and having Grant design a nice box... taking the cut sheet over to this guy and setting it up. Great way to gain experience and make a few bucks.

CB: I have been the loudest at my school since the SX and Orion 1200D, it no longer means nothing to me //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif I can't wait to start offering hair tricks though.

True dat.. yeah its a great idea I actually found out that a local shop does the same thing.

 

[saywhat? 5,000+ posts]

it smost likely a huge *** CNC router.

 

[saywhat? 5,000+ posts]

but the skilled people can use a good table saw/router combo

 

[dmz2711 10+ year member]

What is the slanted piece behind the subs for??? Does it somehow direct the air toward the port or somethin? i know its probably a stupid question but i'm just wonderin:crap:

 

[saywhat? 5,000+ posts]

not a stupid question really, its not a "daily box" type thing to do. it helps load the subs, as far as keeping it as linear as possible throughout its stroke. that does the rear and the seats do the front.

 

[baseballer1100 5,000+ posts]

it smost likely a huge *** CNC router.

but the skilled people can use a good table saw/router combo

True. That would be sweet.

 

[dmz2711 10+ year member]

not a stupid question really, its not a "daily box" type thing to do. it helps load the subs, as far as keeping it as linear as possible throughout its stroke. that does the rear and the seats do the front.

oh ok i see. is there a certain way to figure out what angle to put it at or is it just a 45? also is there a name other than "the slanted thing?" thanks for the reply

 

[ngsm13 5,000+ posts]

Doubt he'd use a CNC to make cuts, waste of time.

Large industrial table saw... and a large table router.

My neighbor has a 20,000 sq. ft. wood-working shop... I love it.

nG

 

[saywhat? 5,000+ posts]

hell we just called it an angle brace lol. rear loader? but that sounds like a hick tool for a truck or someshit LOL

was told to do it as close to half the bottom depth to about the same length on the back wall