wall build for 4 aq 18's in expedition

[05_ZX636 10+ year member]

Guy on other forum did design, its in 98 expedition behind front seats for 4 audioque hdc3 18's. I got the subs, gotta order amps next week hopefully. Will either be 2 IA 40.1's or 2 AQ 3500d.1's. I will try to take pics tomorrow before I go to work of what is done so far. I have the shell built inside the truck, still gotta do the 45's, port, fiberglass mat inside and put the 3 fronts on. Anyway here is what will look like:

Click to read more...

 

[RAM_Designs 5,000+ posts]

Burp box, I assume? Because that appears to be tuned pretty high.

 

[05_ZX636 10+ year member]

supposed to be tuned around 36hz was what i was told

 

[RAM_Designs 5,000+ posts]

supposed to be tuned around 36hz was what i was told

If it's 24ft^3 after displacements it will be.

 

[05_ZX636 10+ year member]

its right around 25 after displacements, I have a ton of bracing and stuff left to go in it

 

[RAM_Designs 5,000+ posts]

Well then it should work just fine, now post some pics! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

For some reason it just appeared to have a larger port to me, but turns out it's spot on.

 

[05_ZX636 10+ year member]

robin butler (iamamp3pimp is screen name) designed it, i think he is on this forum so he may chime in.

 

[05_ZX636 10+ year member]

still have along way to go, and this is the first build I have done from inside truck, I was told to get a Pocket Hole jig, and without this it would be almost impossible for me to get this far, and working by myself with a skill saw is slow also.