voicecoil wiring options

[_DjScrew_ 5,000+ posts]

How could I wire two DVC 1 subs? What ohm load would I get wiring it in series?

i think series would be 4ohms..

 

[gansan 10+ year member]

my amp says its 400rms @ 4ohm n 600rms @ 2 ohm. does that mean it gives out more power when its connected as 2ohm? if it is, must i go get 2ohm woofers?

 

[dkguitarist 5,000+ posts]

so what if u have a dual 2 ohm sub and a mono amp that is stable for 2 ohm and i want it to be 2 ohm the diagrams show a total of 1 ohm and then 4 ohm loads so if i want the amp to have a 2 ohm load then would i buy a 4 ohm speaker that will equall 2 ohm to the amp? i thought u had to match the ohms up and the lower ohms the more bass u will get. so then what combo should i do?
ps> im getting 1 sub and a mono amp.

as for your setup, 2 dvc 4s will equal a 1 or 4 ohm load.

1 dvc 4 =2 ohm load.

the lower ohms, the more "wattage" is available due to less resistance. amps don't put out "bass". the sub does.

 

[_DjScrew_ 5,000+ posts]

yes it will give out more power @ 2. you don't need 2 ohm woofers, different combinations that will get you to 2

 

[dkguitarist 5,000+ posts]

Ok.......... so how would you wire a 13 w7 at 3 ohms off a pa a3000db?

in series.

pos to neg then pos to amp and neg to amp.

 

[dkguitarist 5,000+ posts]

**** i love newbs. //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

 

[gansan 10+ year member]

yes it will give out more power @ 2. you don't need 2 ohm woofers, different combinations that will get you to 2

but it says i cant do 2 4ohm dvc = 2ohm load...

 

[_DjScrew_ 5,000+ posts]

**** i love newbs. //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

yea, i don't see how the charts are that complicated.

 

[dkguitarist 5,000+ posts]

but it says i cant do 2 4ohm dvc = 2ohm load...

no. get 2 dvc 2ohm woofers

or 1 dvc 4ohm woofer.

not that hard

 

[dkguitarist 5,000+ posts]

yea, i don't see how the charts are that complicated.

seriously dude. it just drives me crazy. //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif//content.invisioncic.com/y282845/emoticons/furious.gif.fc81ca146dbff91fede3ed290dbc4f4c.gif

but i think they all expect us to "spoon feed" them..//content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif

 

[gansan 10+ year member]

^^got it.. i made a mistake buying a 4ohm sub. gotta go get those other ones. ugh....hate changing stuff n trying to sell the old ones.

 

[tein_69 10+ year member]

i was just wondering if i could wire my subs like this :

so i can obtain a 4 ohm load , the subs are in two seperate boxes

 

[tein_69 10+ year member]

i was just wondering if i could wire my subs like this :

so i can obtain a 4 ohm load , the subs are in two seperate boxes

anyone??

 

[azbass 5,000+ posts]

http://www.rockfordfosgate.com/rftech/wiringwizard.asp

go.

 

[tein_69 10+ year member]

yeah but iwant to know if i could wire them in parallel in to seperate boxes