UPS can **** it.....FED EX came early!!!

[Chevyaudio 5,000+ posts]

To tune lower you would have to add port...not cut it.

and if this is for HT I would tune lower. Home Audio...primarily music, 28hz is fine. But for HT when you are trying to recreate the sound of explosions, and earthquakes...material that is subsonic, I would definatly tune in the low 20s high teens.

 

[Warbleed 10+ year member]

Tuning low improves your lowend response, but you don't want to tune too far below tuning as your response starts to look funky and group delay starts to look nasty. I'd probably shoot for around 24-25Hz with that driver.

 

[phantom240 5,000+ posts]

How did you come across b-stock woofers?

 

[ItalynStylion 10+ year member]

To tune lower you would have to add port...not cut it.
and if this is for HT I would tune lower. Home Audio...primarily music, 28hz is fine. But for HT when you are trying to recreate the sound of explosions, and earthquakes...material that is subsonic, I would definatly tune in the low 20s high teens.

I meant to say that I'm changing the tuning by cutting the port to length. I needed to cut it to tune to 28 but now I WONT cut it if I plan to tune lower.

 

[ItalynStylion 10+ year member]

I think my port just arrived at the house while I was at work.....Build time when I get home //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[BEELZEBUB DEATH 10+ year member]

ups sux!!! l

 

[theothermike 10+ year member]

type b-stock in their search bar, it brings up a diff page.

and for discounts when not buying a product already being discounted somehow, type forum. i think it like 10 - 15% off subs, amps, deadening, and 1/0 wire they make.

Mike-

and also i vouch for 25-26hz as most said.

 

[jeremiah 10+ year member]

what's the RMS of that sub?

 

[ItalynStylion 10+ year member]

what's the RMS of that sub?

 

[ItalynStylion 10+ year member]

Do you think I should stuff the box with anything?

 

[tRidiot 10+ year member]

FedEx can **** it too..... after leaving my TC9 12" sitting out in the pouring rain. Maggots.

 

[ItalynStylion 10+ year member]

FedEx can **** it too..... after leaving my TC9 12" sitting out in the pouring rain. Maggots.

That sucks.........ON WITH THE BUILD PICS!1!!//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

The port came in yesterday. I knew it was a 4" port 18" long but I didnt quite grasp the magnitude of just how big that actually was. Pics explain.....

I pretty much finished staining the box last night. I had the box raised up a little bit that way I could do the top and 4 sides, then once they dried over night I turned it over this morning and did the bottom face (where the sub and port will be) before I left for work this morning. I have to seal it with polyurethane sealer after the stain sets completely. I'm surprised how well it's coming out, it's really going to look nice I think:yumyum:

 

[jeremiah 10+ year member]

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif I have 2 4" ports but it's just PVC //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[ItalynStylion 10+ year member]

I finally finished the box and the sub is functional now. I just need to add some feet to raise it up so it can be down fired. I haven't got to test it yet but it should sound nice

 

[Kold_Killa 10+ year member]

so what tuning did you end up with?