Two amps for sale

  • 6
    Participant count
  • Participant list
Status
Not open for further replies.

subzero
5,000+ posts

CarAudio.com Veteran
Item(s) for Sale:

Two Soundstream X3.71 Class D 6500watt max mono blocks.

X3.71

chart_zps9a61ddb7.jpg


The numbers where

on a test tone to the burp freq 47hz burp tuning

On a 12 volt - actual was 12.85 give or take a few

1.2ohms, current draw 55.33, ACVoltage measured was 66.4 volts per amp.

Thats all I got out of them because I was aiming for the unclipped 1% THD area.

pretty much right in rated power.

Item(s) Description/Condition:

used one mounting wear, general usage signs

NEW one is BNIB not even opened yet

Price:

Soundstream X3.71 amp Used amp 800

Soundstream X3.71 amp BNIB amp $ $950

Shipping and Miscellaneous Item Information:

CONUS ONLY, Lower 48 states.

Item Pictures:

Used X3.71

P9130013.jpg


P9130012.jpg


P9130011.jpg


P9130008.jpg


NEW BNIB pics

P9240138_zps0386fcb7.jpg


(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

 
Last edited by a moderator:
You may want to post clamped numbers to help your sale man!
Ok well, The numbers where

on a test tone to the burp freq burp tuning

On a 12 volt - actual was 12.85 give or take a few

1.2ohms, current draw 55.33, ACVoltage measured was 66.4 volts per amp.

Thats all I got out of them because I was aiming for the unclipped 1% THD area.

pretty much right in rated power.

 
Yea you said 6500w max so I'm guessing that's at 18v and 1 ohm. Looking at this it seems to be a good 4k watts easy though
these are not 18v stable. only 16v. I will add that in op.

 
[quote name='akheathen']what happened to the burned one? been trying to get a response about it..... @subzero;[/QUOTE]

I took it off sale because to many people giving grief over it. I sill have it. Sorry, I thought I sent you pm.
 
Status
Not open for further replies.
Activity
No one is currently typing a reply...

Similar threads

How I would approach it is install your new amplifier and start using it. Install a voltage gauge and if you see your voltage lowering then add...
4
512
Additinally, no need to reference "max" anything as those specs are useless. Most of know how to look at specs for a given speaker, amp, HU, etc...
2
596
Hello all. Used to come on these forum quite a bit. I used to compete in IASCA MECA etc. and placed 1st 2x with this setup. Anyway this is my baby...
0
885
You don't need two amps. The speakers come with crossovers to help protect the tweeters.
14
1K
Perhaps you changed something without mentioning it here? Maybe a loose turn on line? I dunno man...but we'll take it. Hopefully it keeps working. 👍
16
2K

About this thread

subzero

5,000+ posts
CarAudio.com Veteran
Thread starter
subzero
Joined
Location
Chandler, AZ
Start date
Participants
Who Replied
Replies
16
Views
2,952
Last reply date
Last reply from
subzero
Screenshot 2024-05-31 182935.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0
Screenshot 2024-05-31 182324.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0

New threads

Top