Tuning the Alpine PXA-H800 DSP

[Boomin_tahoe 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/popcorn.gif.32dd9e22fd77e77bc3c907062768fcd2.gif

 

[JohnKuthe]

Is your self esteem that damaged you feel the need to "show off" what you "know" in every thread?
As far as the DSP stuff...What does it hurt to at least take some people's advice at face value without linked proof or documentation. Try NSTALN's suggestion. Worst case its a waste of time, but there is a chance it will get you going in the right direction. Sitting there adamantly repeating that we are a bunch of know-nothing egomaniacs is getting you nowhere.

Exactly I'm trying to wade through a bunch of that. but I think I'm seeing what I might have to do. Now I just have to scroll back in this thread and find it!

John Kuthe...

 

[JohnKuthe]

Running multiple RCA's in doesn't 'hurt' but it doesn't serve any practical purpose either. If you're set to 5.1 in for your AUX (which is fine) then the signal will just be summed into 2 channel. If you set your inputs to (3) sets of AUX's then AUX 1 will have your 'front' audio input from the HU, AUX 2 will get it's audio from the 'rear' channel, and AUX 3 would only receive subwoofer frequencies. This isn't what you're wanting.
8 outputs will still allow you to run your speakers with passive crossovers…example; (1) RCA pair into the PXA, (8) RCA's out- RCA's 1&2 front high into front channel of the PDX amp, those two front channels wired to your front passives then off the the individual drivers. RCA 8 is dedicated to your sub channel of the PDX. You now have 5 more RCA's to work with…you can run RCA's 3&4 and 5&6 to your PDR front and rear channel for your 6x9's and either not use the #7 RCA or you can add a center channel or a second sub. Later you can take RCA 3&4 and plumb them to all 4 channels of the PDR and you can use 5&6 for running the front speakers active.

You CAN accomplish what you're trying to do with the equipment you currently have…it's just set up wrong.

Oh, and I'm using two channels for the PDR 75W per channel amp for the dash PHD drivers, crossovers for now and tweeters. Later for full active I will use the other two PDR channels, and I already had instal;ler guy run 12AWG speaker wires up there for future expansion to full active. PDX 100Wx4 is for the 6x9s. And the sub, 500W.

John Kuthe...

 

[Slo_Ride 5,000+ posts]

Yep! Like the infinite number of monkeys and one typing will write all Shakespeare's stuff! I'd prefer a more directions and effective solution.
John Kuthe...

Well bro, you're going to have to learn to ignore somethings while at the same time listening to others. Keep an open mind, prepare to eat a little crow , and do not be a pretentious ass. You pissed off a lot of folks, but they are still a few of us trying to help you. The outcome of this is solely on you.

 

[JohnKuthe]

Well bro, you're going to have to learn to ignore somethings while at the same time listening to others. Keep an open mind, prepare to eat a little crow , and do not be a pretentious ass. You pissed off a lot of folks, but they are still a few of us trying to help you. The outcome of this is solely on you.

Not solely on me, I'm often provoked! And I'm not a pretentious ***, too much. But I do have a rich background in electronics in general and computers, which lets others know I can understand any techie stuff they choose to explain to me.

Little to no good information is then transacted.

John Kuthe...

 

[Papermaker85 5,000+ posts]

this ***** is VAP..

 

[Papermaker85 5,000+ posts]

https://youtu.be/3GkC0IHCtdc

 

[Slo_Ride 5,000+ posts]

Not solely on me, I'm often provoked!
Little to no good information is then transacted.

John Kuthe...

Like I said, you're going to just have to deal with it or learn to ignore it. Play nice if need be. Get the information you need and quit trying to piss people off. Or at least wait until you have your system up and going how you'd like.

 

[Slo_Ride 5,000+ posts]

this ***** is VAP..

No idea what that means or how it is useful.

 

[Slo_Ride 5,000+ posts]

https://youtu.be/3GkC0IHCtdc

Again not helpful. Just shit post.

 

[JohnKuthe]

Like I said, you're going to just have to deal with it or learn to ignore it. Play nice if need be. Get the information you need and quit trying to piss people off. Or at least wait until you have your system up and going how you'd like.

Results in ever growing irrelevant thread material! I rarely start s h i t but I can finish s h i t!

John Kuthe...

 

[Slo_Ride 5,000+ posts]

Results in ever growing irrelevant thread material! I rarely start s h i t but I can finish s h i t!
John Kuthe...

Seriously? I'm trying to help you fit in with this forum, while at the same time trying to get people to lay off the insults. If I'm wasting my time then just say so.

 

[Chris McNeeley]

So.

 

[Boomin_tahoe 5,000+ posts]

He's more concerned about the insults/sarcasm we give him rather than actual help.

 

[JohnKuthe]

Seriously? I'm trying to help you fit in with this forum, while at the same time trying to get people to lay off the insults. If I'm wasting my time then just say so.

Well thank you then! I'm not worried about fitting in, I just wanna get my car audio equipment working well!

John Kuthe...