i had a pioneer HD 5600 in my subaru, but gave it to my step dad for his truck. I went to intall it and all was well, rewired and working. but once i put the trim back on i noticed it moved when i toughed the buttons. So i pulled it out and tried to fix it and nothing. No screen or sound. At first i though it was the extra blue and white wire but im pretty sure its not becuase it was working.I checked the connections and couldnt find anything obvious.And when i did so my step dad insisted i didnt unplug the batterty while i did this ( unsafe i know, but he wouldnt listen). SO can anyone lend a hand in setting this up for him?
-
1Participant count
-
Participant list
Activity
No one is currently typing a reply...
Similar threads
- Started by .........
- The Lounge
And I moved my underhood fuse block to be harder to see 🤣
- Started by spokey9
- Amplifiers 2
I'd probably start by making sure the connector at the back of the HU is tight.
Hi all,
In the process of adding a sub and new speakers to my 5th gen RAM. In terms of what happened, I installed a 2x10 sub and it's running...
- Started by ThumpNoThump
- Wiring, Electrical & Installation
Yes you can if you have all the connectors in the rear of the stereo. There should be a bunch of rca connectors plugged in the back of it and if...
- Started by 6amahuch9
- Amplifiers
About this thread
New threads
-
-
2017 cherokee latitude help with sub- Started by SamuraiRob
- Replies: 12
-
-
-