Okay so here it goes,
The last thread got very cluttered and some stuff people said was true others was not. So this thread is to give you guys clear facts pics and prices of my line of U.S. built subwoofers and other details for future plans. Again as a reminder my subs are made in the U.S.A
Lets start with subwoofers,
Off the bat, I will be offer two types of woofers there is the 1.5k model and a 2.5k models
the detail on those is as follows,
12 spoke aluminum frames, 3 inch 4 layer wound voice coil. It will come with a dual 4 or dual 2 setup. They have 8 inch linear spiders with integrated 12 guage lead wires. It has a dual vented ferrite magnet with direct voice coil cooling. The cone is heavy treated pulp with double stiched high roll surround. We rated these woofers at 1.5 k rms and they come in 10,12,15,18.
The 2.5k also have 12 spoke frame and a 4 inch 4 layer coil also comes in d2 or d4 multiple 10 inch linear spider with 12 guage leads. Vented triple ferrite magnet. The cone is made from carbon fiber and the highroll surround is double stiched. These are rated for 2.5k rms. they also come in 10,12,15,18
The 18 inch model is a little different it doesnt have double stiching and it has a 6 spoke frame.
Those are the woofers that are going to be available very soon my sample should be ordered mid next week and get to mee within a week.
the prices are as follows
1.5k rms
295 for 10"
320 for 12"
370 for 15"
420 for 18"
2.5k rms
395 for 10"
420 for 12"
470 for 15"
570 for 18
Those prices are shipped. The only time there may be a slight increase is if i have to ship a 15 or 18 to the west cost.
I am offering a dicount to the first 5 people that place orders as long as they promise to write a review for me
Now that all of that is out there everybody can know the real truth about my company without the clutter.
Future plans for the company do include, a more entry level sub like 500-800 rms, There is a 5k sub being built now that includes a quad stack motor, i plan to carry a full range of class d amps ive seen the 5k amp internals its straight beef but unfortunatly i do not have pics to publish at this time, and lastly i planning on having a line of componant speakers as well.
Thanks for the support everyone ill be updating everyone with somemore pics and videos of my subs as soon as possible.
Thanks
Tom
2.5k Model
The last thread got very cluttered and some stuff people said was true others was not. So this thread is to give you guys clear facts pics and prices of my line of U.S. built subwoofers and other details for future plans. Again as a reminder my subs are made in the U.S.A
Lets start with subwoofers,
Off the bat, I will be offer two types of woofers there is the 1.5k model and a 2.5k models
the detail on those is as follows,
12 spoke aluminum frames, 3 inch 4 layer wound voice coil. It will come with a dual 4 or dual 2 setup. They have 8 inch linear spiders with integrated 12 guage lead wires. It has a dual vented ferrite magnet with direct voice coil cooling. The cone is heavy treated pulp with double stiched high roll surround. We rated these woofers at 1.5 k rms and they come in 10,12,15,18.
The 2.5k also have 12 spoke frame and a 4 inch 4 layer coil also comes in d2 or d4 multiple 10 inch linear spider with 12 guage leads. Vented triple ferrite magnet. The cone is made from carbon fiber and the highroll surround is double stiched. These are rated for 2.5k rms. they also come in 10,12,15,18
The 18 inch model is a little different it doesnt have double stiching and it has a 6 spoke frame.
Those are the woofers that are going to be available very soon my sample should be ordered mid next week and get to mee within a week.
the prices are as follows
1.5k rms
295 for 10"
320 for 12"
370 for 15"
420 for 18"
2.5k rms
395 for 10"
420 for 12"
470 for 15"
570 for 18
Those prices are shipped. The only time there may be a slight increase is if i have to ship a 15 or 18 to the west cost.
I am offering a dicount to the first 5 people that place orders as long as they promise to write a review for me
Now that all of that is out there everybody can know the real truth about my company without the clutter.
Future plans for the company do include, a more entry level sub like 500-800 rms, There is a 5k sub being built now that includes a quad stack motor, i plan to carry a full range of class d amps ive seen the 5k amp internals its straight beef but unfortunatly i do not have pics to publish at this time, and lastly i planning on having a line of componant speakers as well.
Thanks for the support everyone ill be updating everyone with somemore pics and videos of my subs as soon as possible.
Thanks
Tom
2.5k Model
