Three MTX 10"s ... What amp?

[TBIRD 38 LX 10+ year member]

I have the three MTX 10" 6000 subs in a sealed box kit from Crutchfield. 12 ohm subs wired in parallel for total 4 ohm impedance/ 46-150 hz freq response. 150-750 watts RMS. 1500 watts peak.

Now ... for the good stuff...

You think the Lanzar Vibrant 238 would be a good amp? Its 2 channel 800 watt amp.

The amp is like 110 bucks on ebay with shipping ... I think its good bang for the buck, better than that "Pyramid" garbage.

If not, what amp would bump 'em, under 2 bills?

Or should I sell the subs, get two Kicker Comp VR 12"s and a similar amp?

Any other ideas/suggestions?

thanks

Andrew

Click to read more...

 

[tglisson 10+ year member]

Originally posted by TBIRD 38 LX I have the three MTX 10" 6000 subs in a sealed box kit from Crutchfield. 12 ohm subs wired in parallel for total 4 ohm impedance/ 46-150 hz freq response. 150-750 watts RMS. 1500 watts peak.

 

Now ... for the good stuff...

 

You think the Lanzar Vibrant 238 would be a good amp? Its 2 channel 800 watt amp.

The amp is like 110 bucks on ebay with shipping ... I think its good bang for the buck, better than that "Pyramid" garbage.

 

If not, what amp would bump 'em, under 2 bills?

 

Or should I sell the subs, get two Kicker Comp VR 12"s and a similar amp?

 

 

Any other ideas/suggestions?

 

thanks

Andrew

first off watch yourself on ebay //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif make sure they are legit (bad past experiences) Lanzar would be a good amp...

may i suggest to you something eles

4 x 125 Watts RMS at 4 Ohms

·4 x 250 Watts Max at 4 Ohms

·2 x 500 Watts Max at 4 Ohms Bridged

·4 x 200 Watts at 2 Ohms

·Electronic Crossover Network

·Bass Boost Circuit

·Bridgeable at 4 Ohms

·2 Ohms Stereo Stable

·Tri-Mode Capable

·Gold RCA Inputs

·Line Outs For CH1/CH2/CH3/CH4 channels.

·Power & Protection LED Indicators

·Advanced Protection Circuitry

·Soft Turn On/Off

·Remote Control Bass Booster

·Frequency Response: 15 Hz - 35 kHz

·S/N ratio: 90dB

·Dimensions: 11.5"W x 2.3"H x 14"L

and were you can get it is in your message or pm or whatever you wanna call it

ty-

 

[MTXBlockShaker]

I have the same setup as you do, except my 10's are DVC 4 ohm subs, wired to 2.66 ohms, i have the MTX 6500D w/ EBC control that i picked up for 250, without the EBC you can get it for around 215$, anyway, even wired at 2.66 this is a great combo, it hits super hard, 775 watts. And with your subs being wired to 4 ohms, it would be an even better combonation. P.S. this is the second biggest amp MTX produces, the 8100D costs around 325, but puts out 1500 watts peak.

 

[gellis4 10+ year member]

Originally posted by tglisson first off watch yourself on ebay //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif make sure they are legit (bad past experiences) Lanzar would be a good amp...

 

may i suggest to you something eles

 

4 x 125 Watts RMS at 4 Ohms

·4 x 250 Watts Max at 4 Ohms

·2 x 500 Watts Max at 4 Ohms Bridged

·4 x 200 Watts at 2 Ohms

·Electronic Crossover Network

·Bass Boost Circuit

·Bridgeable at 4 Ohms

·2 Ohms Stereo Stable

·Tri-Mode Capable

·Gold RCA Inputs

·Line Outs For CH1/CH2/CH3/CH4 channels.

·Power & Protection LED Indicators

·Advanced Protection Circuitry

·Soft Turn On/Off

·Remote Control Bass Booster

·Frequency Response: 15 Hz - 35 kHz

·S/N ratio: 90dB

·Dimensions: 11.5"W x 2.3"H x 14"L

 

and were you can get it is in your message or pm or whatever you wanna call it

 

 

ty-

what are all the stats for?? and please stop posting them, they aren't all that important.

and, for the MTX subs, go to http://www.ikesound.com, and look around, http://www.thezeb.com , there are a couple of others.

Or, you could buy my PPI amp, 500w RMS @ 4 ohms.. just thought i'd add that in there //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 

[tglisson 10+ year member]

Originally posted by gellis4 what are all the stats for?? and please stop posting them, they aren't all that important.

 

and, for the MTX subs, go to http://www.ikesound.com, and look around, http://www.thezeb.com , there are a couple of others.

 

Or, you could buy my PPI amp, 500w RMS @ 4 ohms.. just thought i'd add that in there //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

Dude I just figured that, if he could see the specs, then he would be more interested in the amp, but if you think its a hassle then I wont...

ty-

//content.invisioncic.com/y282845/emoticons/greedy.gif.5a53e6246569d7ab79867170f3b06629.gif

 

[gellis4 10+ year member]

Originally posted by tglisson Dude I just figured that, if he could see the specs, then he would be more interested in the amp, but if you think its a hassle then I wont...

 

 

ty-

 

//content.invisioncic.com/y282845/emoticons/greedy.gif.5a53e6246569d7ab79867170f3b06629.gif

some of the things are helpful, but if someone was really interested in buying something, they would find it out themselves. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif