This setup worth it?

  • 3
    Participant count
  • Participant list

Mike437
10+ year member

Senior VIP Member
Alright so i finally got some money to put some cheap bass in my beater. I work at best buy so i am trying to use my discount to its fullest hear so this is what i am thinking setup wise:

-Subs and box: 2 12" Rockford P2's in box

http://www.sonicelectronix.com/item_10146_Rockford+Fosgate+P2L-212.html

w/ discount get that for $170

-Amp: Rockford P500-2

http://www.bestbuy.com/site/olspage.jsp;jsessionid=GO0VPPOSCAO4JKC4D3KFAGI?_dyncharset=ISO-8859-1&id=pcat17071&type=page&st=P500-2&sc=Global&cp=1&nrp=15&sp=&qp=&list=n&iht=y&usc=All+Categories&ks=960

I dont know what i get for the discount but probably $160, haven't checked yet.

But is this setup worth the $400 with install kit? I am a little confused about using a 2 channel amp with subs, says 125w rms at 4 ohms but if bridged rockford says it puts out 500w rms? does not make sense to me.

Thanks for any help guys.

 
It's all right.

Take full advantage of your benefits.

Buy two 12" R's

And the Fosgate 1000

You get the R's for

And the Fosgate 1000 wont even run you but around 250-300 IIRC. I might be slightly off on that one

Edit - Buy the equiptment there , have someone build you a box/build it yourself. Trust me on that, the prefabs BB has ***** nuts.

 
rockford is good but imo it is way overprice
yeah i am well aware of that but i figure with my discount its kind of worth it. Plus it requires minimal effort, already loaded and box is already made. Although i am a little weary that the box is only 5/8" mdf, i guess i am used to using 3/4" and 1" mdf.

 
It's all right.
Take full advantage of your benefits.

Buy two 12" R's

And the Fosgate 1000

You get the R's for

And the Fosgate 1000 wont even run you but around 250-300 IIRC. I might be slightly off on that one

Edit - Buy the equiptment there , have someone build you a box/build it yourself. Trust me on that, the prefabs BB has ***** nuts.
haha yeah those prefab boxes are way over priced, its hilarious when we get these kids coming in dropping a grand for a shitty setup. Plus our install costs are through the roof. But i have already had 2 12" type arghs they require too much power for my tiny alternator. 500 watts is as much as i can go.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

This would go a long way to alleviating the dimming issue, up to around 4000 watts. It can handle 100A continuous and up to 285A 7 second burst...
6
853
I had some 9500 series 12s by MTX that were some slamming subs!! Should have kept those along with those torpedo RE XXX 12s
15
1K
I am doing an all JL audio instal on my new F250 SD . I'm using a Audio Control LC 5i Pro with a JL Audio XDM 700/5 and C3-650's in all 4 doors...
7
1K
Id sit down and figure out exactly what all you will be installing for amperage consumption and add another 10-15% amperage useage on top of that...
21
2K

About this thread

Mike437

10+ year member
Senior VIP Member
Thread starter
Mike437
Joined
Location
Pittsburgh, PA
Start date
Participants
Who Replied
Replies
4
Views
454
Last reply date
Last reply from
Mike437
IMG_0005 (5) - Copy - Copy.JPG

Dan Medina

    Jun 17, 2024
  • 0
  • 0
Screenshot 2024-05-31 182935.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0

New threads

Top