SOLD TC 3HP/WMD 18" Hybrid D2

ciaonzo
5,000+ posts

TheContinental
11,703
76
WI
Sound quality is my top priority but sometimes I just want to belt out sine waves all day and beat down the block. This what I bought to fill that bill.

It has a 3" diameter D2 aluminum flatwind with a wind height of 3" which means it's a suspension limited design. If I recall correctly PAP has given this a rating of 2k RMS but I'm betting that's conservative. Single 9.25" stiff spider.

This also has a removable top assembly so if you have any need to transfer the motor or top, this can be done. It has a four bolt pattern and uses allen heads.

A few specs: (series)

89 dB 1W/1M

Fs 36hz

Qms 8.63

Qes .77

Qts .7

Vas 2.9cu.ft

Re 3.7ohms

BL 23.77 tm

Here is a link to some photos of it being built by PAP:

http://pierceaudioproducts.com/forum/index.php/topic,777.msg11644/topicseen.html#msg11644

This is new and has never been mounted yet. I've had about 425 watts through each coil in free-air to get an idea of it's potential and there's no doubt it's a monster. Probably 1 hour total time on the driver for testing. 10/10 mechanical and cosmetic.

$400 plus shipping.

DSC02785.jpg


DSC02784.jpg


DSC02778.jpg


DSC02779.jpg


DSC02782.jpg


I take care of PayPal. Thanks guys.

 
My, my... This thread has been busy while I've been away. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I appreciate the bumps guys, thank you.
For your consideration, I bought the motor new, paid shipping on 45lbs from Cali, used the motor for other top assemblies I have, then paid shipping on it again to get it back to the west coast so that the professionals at PAP could use it as a reference for proper fitment and exact coil alignment while they proceeded to masterfully custom work this top assembly to be removable at my request. I then paid shipping a third time from the west coast to finally get this monster in my hands.

I realize that me trying to recover shipping costs is not your responsibility but I am also aware of what the market will bear for this level of performance along with the dollar amount that I have invested in it.

I have had some generous offers and not a single lowball, by which I'm well impressed. In light of my potentially scandalous comparison to the established Omega 18 //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif(I should have consulted you first Alex) and respected input from other members, I am lowering my asking price to $400 plus shipping. This officially puts me at a point where I am losing money by selling it.

Such is my love for this board. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
any estimate how much it cost to make a twin? i already have same motor...
//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Thanks Bean! //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

This bad boy is pending three times over, lol.

 
Trade 2 15" RE SE's + Cash?
I appreciate the offer Toone but I think this is as good as gone. I'll know for certain Wednesday or Thursday. I'll consider it if the other two buyers don't come through.

 
All mine guys all mine... lol. Thanks for the support while I was on forced vacation, but I'm back now, plenty of stuff for sale and a few things im looking for. All to come in threads shortly! Ciaonzo is the man guys, its foolish not to buy his stuff as soon as it posts based simply on he doesn't post anything not worth having, so if you need it or not, buy it anyway... b4 I do!

 
All mine guys all mine... lol. Thanks for the support while I was on forced vacation, but I'm back now, plenty of stuff for sale and a few things im looking for. All to come in threads shortly! Ciaonzo is the man guys, its foolish not to buy his stuff as soon as it posts based simply on he doesn't post anything not worth having, so if you need it or not, buy it anyway... b4 I do!
Driver is indeed sold to this man right here.

Welcome back Phill! //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

ciaonzo

5,000+ posts
TheContinental
Thread starter
ciaonzo
Joined
Location
WI
Start date
Participants
Who Replied
Replies
99
Views
5,628
Last reply date
Last reply from
Boswell59
Screenshot_20240614-101246_Google.jpg

chillin

    Jun 14, 2024
  • 0
  • 0
24 civic.jpg

Popwarhomie

    Jun 12, 2024
  • 0
  • 0

New threads

Top