Sound quality is my top priority but sometimes I just want to belt out sine waves all day and beat down the block. This what I bought to fill that bill.
It has a 3" diameter D2 aluminum flatwind with a wind height of 3" which means it's a suspension limited design. If I recall correctly PAP has given this a rating of 2k RMS but I'm betting that's conservative. Single 9.25" stiff spider.
This also has a removable top assembly so if you have any need to transfer the motor or top, this can be done. It has a four bolt pattern and uses allen heads.
A few specs: (series)
89 dB 1W/1M
Fs 36hz
Qms 8.63
Qes .77
Qts .7
Vas 2.9cu.ft
Re 3.7ohms
BL 23.77 tm
Here is a link to some photos of it being built by PAP:
http://pierceaudioproducts.com/forum/index.php/topic,777.msg11644/topicseen.html#msg11644
This is new and has never been mounted yet. I've had about 425 watts through each coil in free-air to get an idea of it's potential and there's no doubt it's a monster. Probably 1 hour total time on the driver for testing. 10/10 mechanical and cosmetic.
$400 plus shipping.
I take care of PayPal. Thanks guys.
It has a 3" diameter D2 aluminum flatwind with a wind height of 3" which means it's a suspension limited design. If I recall correctly PAP has given this a rating of 2k RMS but I'm betting that's conservative. Single 9.25" stiff spider.
This also has a removable top assembly so if you have any need to transfer the motor or top, this can be done. It has a four bolt pattern and uses allen heads.
A few specs: (series)
89 dB 1W/1M
Fs 36hz
Qms 8.63
Qes .77
Qts .7
Vas 2.9cu.ft
Re 3.7ohms
BL 23.77 tm
Here is a link to some photos of it being built by PAP:
http://pierceaudioproducts.com/forum/index.php/topic,777.msg11644/topicseen.html#msg11644
This is new and has never been mounted yet. I've had about 425 watts through each coil in free-air to get an idea of it's potential and there's no doubt it's a monster. Probably 1 hour total time on the driver for testing. 10/10 mechanical and cosmetic.
$400 plus shipping.
I take care of PayPal. Thanks guys.
