Taramps for voice

Do you want left and right separation and fade front and rear? Then you would want a 4 channel. DS and TS line.

If you don't care and just want raw power then the DSP, MD, HD line of monoblocks. I prefer DSP line myself because of the digital crossovers, and clipping limiter.
 
Do you want left and right separation and fade front and rear? Then you would want a 4 channel. DS and TS line.

If you don't care and just want raw power then the DSP, MD, HD line of monoblocks. I prefer DSP line myself because of the digital crossovers, and clipping limiter.
I have a audiocontrol lcq1 . Think it had a eq and crossover in it.
 
Do you want left and right separation and fade front and rear? Then you would want a 4 channel. DS and TS line.

If you don't care and just want raw power then the DSP, MD, HD line of monoblocks. I prefer DSP line myself because of the digital crossovers, and clipping limiter.
Also I have right now a 2000 watt audiopipe. Pushing 2 15 inch evl dual 4 ohms. I think they are 2500 watt max and 1250 rms. U think a taramps bass 3k is good for that?
 
Do you want left and right separation and fade front and rear? Then you would want a 4 channel. DS and TS line.

If you don't care and just want raw power then the DSP, MD, HD line of monoblocks. I prefer DSP line myself because of the digital crossovers, and clipping limiter.
Which dsp would u get? The speakers are 500 watt each. They are prv 6.5 neos 4 of them.
 
im pretty sure boss amps produce the best voices....i heard voices from over 3 blocks away from my buddys ride, boss is the way to go
 
just get the 4 channel. DO not get a monoblock for your mids. Stereo separation is what makes music, music. https://www.amazon.com/dp/B07BK9M6S2/?tag=caraudiocom-20
Ty. I have 1 more queation. These taramps are confusing lol. I wanna get a 1 channel. I see they are all 1 channel. I wanna get the bass 3k. But I seen the smart 3 also. Do u know what the difference is? What confuses me is they have md, hd,ds, bass models and they all have 1 channel. And are all mostly 3000 watts. I just wanna buy the right stuff. Imma definitely get that 4 channel u said.
 
Ty. I have 1 more queation. These taramps are confusing lol. I wanna get a 1 channel. I see they are all 1 channel. I wanna get the bass 3k. But I seen the smart 3 also. Do u know what the difference is? What confuses me is they have md, hd,ds, bass models and they all have 1 channel. And are all mostly 3000 watts. I just wanna buy the right stuff. Imma definitely get that 4 channel u said.
Bass 3k is if you wanna wire to half ohm more sub oriented if you want to abuse the **** out of it like a korean amp. Md is slightly better all around than HD, can work for subs or mid bass drivers. Smart3 is like a regulated power supply amp that does 3000 from 1 ohm to 4 ohms. This would sound a lot louder than the HD and MD series due to this technology which combats impedance rise.

Dsp 3k would be the noob friendly since it has a clipping limiter that prevents you from blowing your gear from a clipped signal.
 
DSP3000 and DSP2500 has been discontinued sadly. DSP1600 is the only option available now.

I would do the Smart 3 for your subwoofers. It does 3000 watts from .8 ohms - 2 ohms.

Bass line if you want to run at .5 ohm.

HD3000 is older and was kept around for people wanting a cheap power for mids/highs.

MD line replaced the HD line and is better built.

Alot of hiphop and other songs don't have stereo separation now a day. I ran my DSP3k and other mono blocks on my 4 10" mids in my doors and didn't mind having no "stereo sound" since it was an SPL based car. But yes I would prefer stereo separation.

Are these mids going in your doors or something like a stunt wall?
 
DSP3000 and DSP2500 has been discontinued sadly. DSP1600 is the only option available now.

I would do the Smart 3 for your subwoofers. It does 3000 watts from .8 ohms - 2 ohms.

Bass line if you want to run at .5 ohm.

HD3000 is older and was kept around for people wanting a cheap power for mids/highs.

MD line replaced the HD line and is better built.

Alot of hiphop and other songs don't have stereo separation now a day. I ran my DSP3k and other mono blocks on my 4 10" mids in my doors and didn't mind having no "stereo sound" since it was an SPL based car. But yes I would prefer stereo separation.

Are these mids going in your doors or something like a stunt wall?
you can run two monoblocks one for each side....
 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Brand new 210 shipped TECHNICAL INFORMATION OPERATION CLASSClass D NUMBER OF CHANNELS01 MAXIMUM POWER@ 12.6 VDC - 1 OHM: 3000W RMS @ 12.6 VDC -...
0
276
The ds has more power...it's rated at 12.6v and the ts at 13.8v... I had the the ts400x4 though and it a good little amp
2
764

About this thread

Tattooman

CarAudio.com Newbie
Thread starter
Tattooman
Joined
Location
brooklyn
Start date
Participants
Who Replied
Replies
14
Views
5,326
Last reply date
Last reply from
Jeffdachef
1000006564.jpg

Mr FaceCaser

    Mar 28, 2024
  • 0
  • 0
1000006569.jpg

Mr FaceCaser

    Mar 28, 2024
  • 0
  • 0

Latest topics

Top