System Progress -- 56k watch out!

[bikejunkie223 10+ year member]

seriously, couldn't you have just gotten a paving crew to roll that machine through your car? It would have been a much faster way to apply all that asphalt!

 

[bibby 5,000+ posts]

Holy majic floating headrest batman!

 

[sundownz Pro Seller]

Holy majic floating headrest batman!

*laughs*

Yah, that thing does look like it's floating doesn't it? The headrest bracket being off to the side like that can really throw you off.

 

[sundownz Pro Seller]

No new pics yet... the passenger side cavity is about 95% full of foam now and my driver side door is now deadened (finally). My package from Second Skin came in today with my Heat Wave, Rattle Pad, and Spray Adhesive. I intended to start on the front part of the floor and remove the seats today... but I had too much paperwork to do and then my show; Heroes, the only thing I watch on TV, was on at 9 PM so I didn't even start today.

 

[vetkilr 10+ year member]

Hurry up slacker.

 

[mobeious 10+ year member]

how do u like the edead vs Damplifier

 

[sundownz Pro Seller]

Edead V1SE2 is great for the money. Damplifier is simply a better product, and you pay for it. If you can afford it... Damplifier any day.

 

[ramos 5,000+ posts]

Better hurry up Jacob . Mr. Morgan is going to accuse you of being as slow as me //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[sundownz Pro Seller]

Better hurry up Jacob . Mr. Morgan is going to accuse you of being as slow as me //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

I got side tracked all of last weekend doing my girlfriends system... but I'm back on the ball now //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Did some more foaming last night, another can down... 8 cans so far. But thats about all for last night... tonight the seats are coming out and the floor is at least getting prepped (cleaned) and ready for deadening.

Once deadening is done... I'll be putting back in most of the interior pieces, running power and signal wires to the back... and starting on the mounting the Aurum Cantus midbass drivers in the doors.

I just ordered a Greddy Turbo kit too... so that may side-track the system even further. This car is going to be cool in the trunk and under the hood, so it'll be good for several different types of car shows //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[vetkilr 10+ year member]

I just ordered a Greddy Turbo kit too... so that may side-track the system even further. This car is going to be cool in the trunk and under the hood, so it'll be good for several different types of car shows //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Smart:up2somet:

 

[denim 5,000+ posts]

I have to hear this thing when finished.

 

[sundownz Pro Seller]

* Front Floor with Interior stripped. You can also see in this picture that the drivers door is deadened as mentioned in my last post. It took lots of vacuuming and cleaning with orange citrus cleaner to get the floor clean... 12 years of dirt, lost coins, etc was under this carpet. I'd really like to re-do the carpeting... the carpet I took out just sucks.

* This is what I got done tonight. I used the last of one of my Peel & Seal rolls and the last of the 90 ft^2 of Edead V1SE^2 that I bought. I've got about 20 ft^2 of Damplifier that I am going to use on the driver's side... I may order some Raamat and/or more Damplifier to finish up along with some more Peel & Seal to tide me over until that gets here.

 

[Kenny Pollock 10+ year member]

Looks great Jake //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Regarding new carpet... I got my carpet from Stock Interiors and it came pre-molded. Great quality, fast shipping... and I just had to make a few holes for wiring/shifter/seats.

 

[sundownz Pro Seller]

Kenny,

Thanks for that link, prices look great too.

 

[Kenny Pollock 10+ year member]

No problem bro... can't wait to see the final result. When I get my install all done by the end of the year, I'll have to take a trip to a show up there/near there and swing by //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif Only ~11 hours!